599 reviews analysed
1. HY-C MH-6R Magic Heat Bottom Crimp Heat Reclaimer for Use with Wood Burning Appliances, UL Listed, Fits 6" Single Wall Chimney Pipe
Feature
- Only UL listed heat reclaimer on the market. Reclaims up to 30% of otherwise lost heat going up your chimney and distributes it into your home.
- Crimp down configuration is designed for use with wood burning heating applications with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees.
- Easy to install. Fits 6″ flue diameter. Built in soot scraper cleans tubes internally allowing for maximum heat transfer.
- Plugs into any standard 110V household outlet. Removable back allows for easy maintenance. Designed for use with single wall connector pipe.
- Toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or thermostat control mode. Made in the USA. One Year Limited Warranty.
Description
Magic Heat is the only UL listed heat reclaimer on the market. Magic Heat reclaims up to 30% of lost heat form your heating appliance and distributes it into your home using only .31 amp of power, roughly equivalent to a 40 watt lightbulb. Magic Heat is designed for heating appliances with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees. The bottom crimp design makes this unit ideal for wood burning heating applications by containing any creosote within the chimney. A toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or a pre-set thermostat automatically turns the blower fan on when the Magic Heat casing reaches 150 degrees and off at 120 degrees. Magic Heat is easy to install and must be installed between 12 and 24 inches from the appliance flue outlet using single wall connector pipe. How it works: As hot flue gases travel from your heating appliance upward through the flu, they heat the transfer tubes in the inner case. Fresh room air enters thru the back vents and is heated while traveling through the transfer tubes. The 225 CFM fan pushes out the warmed air through the tubes and into your home reclaiming up to 30,000 British Thermal Units (BTU) of lost heat. Flue gases are not restricted and continue up your chimney. Magic Heat is available in 6″, 7″ and 8″ pipe diameters for wood, oil/coal or natural gas burning heating appliances. Manufactured in the USA.
2. ECOFAN AirMax Wood Stove Fan, Large, Black Blade
Feature
- Warm your room up to 38% faster with the largest and highest performing Ecofan model, the Ecofan AirMax
- Ideal for all room sizes, the AirMax circulates more warm air further into your home!
- Tested and proven to save you up to 18% in fuel with more efficient distribution of heat from your wood stove
- No electricity needed, Ecofans generate power by converting the heat from your wood stove into electricity
- Designed and manufactured in Canada for over 20 years, Ecofans have been tested in the harshest winters and come with a 2 year limited warranty
Description
If you own a free-standing wood stove you need an Ecofan! This unique accessory is designed to sit on top of your wood stove and circulate warm air through the room quickly and efficiently. By creating its own electricity from the heat of your stove, Ecofans do not need household energy or batteries. And unlike noisy built-in blowers, the economical Ecofan is whisper quiet. THE ECOFAN AIRMAX is the most powerful model in the Ecofan family, moving up to 175 cubic feet of air per minute (CFM). It is also the largest model at 10” tall x 5.5” wide x 3.3” long and comes with your choice of gold, nickel or black blade colour. The AirMax operates at a stove surface temperature range of 185° F to 650° F (85° C to 345° C). The AirMax has the lowest minimum operating temperature, providing you with the longest operating time of all the Ecofan models.
3. Old Mountain 10142 Black Mini Box Stove Set, with Accessories, 10 1/2 Inch Tall
Description
This Old Mountain cast iron mini box stove set is black in color and an exact replica of box stoves from years gone by. This Old Mountain box stove set comes complete with stove pipe, burner cover, a coal bucket and shovel, a pot, pan, and skillet. This stove measures 10 1/2″ tall, x 6 1/2″ wide and 7 1/2″ long.
4. Magnetic Stove Thermometer Wood Burner Top Thermometer Stove Temperature Meter Stove Flue Pipe Thermometer Fireplace Accessories for Avoiding Stove Fan Damaged by Overheating (2)
Feature
- Measuring range: these wood burner top thermometers measure temperature from 100 ℉ to 900 ℉ (100 ℃ to 500 ℃), which can provide accurate measuring of temperature, the creosote buildup, optimum performance and overheat period is noted on the dial, easy to read with large dial
- Convenient to be placed: with a magnet on the back, these stove flue pipe thermometers can be placed on stove top or side, please note that do not attach these single wall flue pipe thermometers on grilles directly
- Sturdy material: consist of aluminum dial, bimetal sensor, brass pointer, metal handle, sturdy and easy to operate, providing your family with a good monitoring of stove temperature
- Product function: these magnetic stove thermometer can monitor and optimize the work efficiency of your stove, protecting the stove fan from being damaged by overheating
Description
Product advantages:
Convenient to be placed, a magnet on the back allow stove flue pipe thermometer to be placed on stove top or side.
Sturdy material consist of aluminum dial, bimetal sensor, brass pointer, metal handle, sturdy and easy to operate.
Changing of different temperature:
Creosote buildup indicates temperature is too low which can cause creosote and tar deposits in the stove and chimney.
Optimum performance indicates the fuel consumption and heat output are at its most efficient level.
Overheat indicates temperature is too high, risks of stove/ chimney/ stove fan being damaged.
Specifications:
Measuring range: 100-900 ℉/100-500 ℃
Color: as shown in the picture
Material: aluminum dial, bimetal sensor, brass pointer and metal handle
Dial size: 2.45 inch/ 6 cm in length
5. US Stove BSK1000 Cast Iron Barrel Stove Kit
Feature
- An affordable alternative for economical heat in cabins, lodges, or workshops
- Contains everything required to convert a 36 or 55 gallon steel drum into a stove
- Heavy duty cast-iron kit (barrel not included)
- This item is not for sale in WA, OR, and CA due to state restrictions
- Not for residential use
Description
US Stove’s BSK1000 is an all-inclusive kit containing everything you need to convert a 36 or 55 gallon steel drum into a stove. Kit contains: legs, door, flue collar with damper, and all mounting hardware. The BSK1000 is perfect for a rustic cabin, pole barn, garage, or workshop. Simply put, this is the most basic stove you can buy.
This item is not for sale in WA, OR, and CA due to state restrictions.
6. 5 Pieces Fireplace Tools Tool Set Wrought Iron Fireset Firepit Fire Place Pit Poker Wood Stove Log Tongs Holder Tools Kit Sets with Handles Modern Black
Feature
- Classic Fireplace Tools with Ergonomic Handles: The fireplace decoration toolset includes sturdy stand with heavy duty base, brush, shovel, tong and fireplace poker, one for each. Each tool has a firm handle with an orb at the top, feels good in the hand, fatigue free.
- The fireplace tongs help to safely place kindling and reposition logs while the fireplace brush features strong bristles to easily sweep ash and debris, great wood fire pizza tool kit!
- Measures 31-inch height, coordinates with most fire screens, log holders and racks, or outdoor fire pit tools.
- Fireplace Tools Modern, Weighty, sturdy and easy to assemble
- the top support keeps your tools organized, matching with both wood-burning and gas fireplaces.
- One-year Warranty: Replacement parts or repaired parts shall be covered within the Limited Warranty Period.
7. VODA 4-Blade Heat Powered Stove Fan for Wood/Log Burner/Fireplace Increases 80% More Warm air Than 2 Blade Fan- Eco Friendly
8. Midwest Hearth Wood Stove Thermometer – Magnetic Stove Top Meter
Feature
- FOR STOVE TOP SURFACE – Calibrated to read temperature on the surface of your wood stove.
- MAGNETIC ATTACHMENT – Easily attach to your metal wood stove. Magnet will hold to 800°
- F.
- EASY TO READ ZONES – Optimize efficiency, prevent overheating, minimize creosote.
- PORCELAIN ENAMEL FINISH – Premium quality finish to compliment your beautiful stove.
- FLIP UP HANDLE – Quickly reposition meter to find the sweet spot for temp readings.
Description
STOVE TOP SURFACE THERMOMETER
Installation Instructions:
• This thermometer is calibrated to be used on the outside surface of a metal wood stove. • Attach to the stove using the magnet on the back side of the thermometer.
• Place thermometer on the top, front, or side surface of the stove. • Generally you will want to place the thermometer in the location recommended by the stove manufacturer, or the location the stove reaches the hottest temperature.
• Magnet will hold to steel up to 800°F.
Operating Instructions:
• The best operating temperature for most wood stoves is between 400°F and 650°F and is illustrated as the middle zone on your thermometer labelled “BEST ZONE”. • Temperatures below 400°F can create a dirty, smoky fire that leads to creosote buildup in your chimney. Creosote can be a safety hazard. This temperature range is illustrated on your thermometer and labelled “CREOSOTE”.
• A temperature above 650°F consumes more wood without additional room heat as more energy is lost up the stove pipe. This area is illustrated on your thermometer as “TOO HOT”.
Conclusion
By our suggestions above, we hope that you can found Wood Stove Heating Accessories for you.Please don’t forget to share your experience by comment in this post. Thank you!
