Top 9 Whirlpool Dishwasher Counter

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

This undercounter mounting bracket for dishwashers is for solid surfaces like granite. Works with all standard size dishwashers. Can also be used on all stainless and plastic tall tub platforms.

Description ：

Part number :W10426979

Package contains： (1) Dishwasher Under-Counter Bracket and Screws

Part Number W10426979 replaces ：2311792, AH3632890, EA3632890, PS3632890.

W10426979 fits these common brands made by Whirlpool :

Whirlpool, KitchenAid, Maytag, Amanda, Jenn-Air, Estate, Roper, Admiral, Inglis, Magic Chef and others.

This undercounter mounting bracket for dishwashers is for solid surfaces like granite. Works with all standard size dishwashers. Can also be used on all stainless and plastic tall tub platforms.

Product Features：

1. Contains mounting bracket and screws
2. For use with undercounter mounting application
3. Can be used on most brands
4. For solid surface installation

Please note :

This is an Components Brand replacement part, NOT an OEM product. All mentions of brand names or model descriptions are made strictly to illustrate compatibility.

GUARANTEE : For any reason you’re not completely satisfied, You can request a replacement or full refund within 30 days of receiving the goods.no questions asked

Replaces the following part numbers:
WP8269145, WP8269145VP.

Works for brands:
KitchenAid, Whirlpool, Kenmore, Maytag, Jenn-Air, Amana, Estate, Magic Chef, Inglis, Crosley, Roper.

Fixes problem with:
Door latch failure.
Door won’t close.

Contact Us
If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the Discount Parts Direct storefront.

Business Wholesale
We are a small local company from Houston, Texas offer discount parts for retail and wholesale. If you need to purchase parts for business , please contact us for lower rates.

Part 8269145 comes in a pack of two. Mounting brackets secure the top of the dishwasher to the underside of a cabinet or countertop. If your dishwasher moves, shakes, or tilts forward, it may be time to replace one or both of the mounting brackets. The PartsBroz 8269145 bracket set fits and performs just like the original. Use it with a variety of top name brand dishwashers.

Installation Tips

Before beginning the repair, disconnect the dishwasher from its power source. Depending on the model, you may also need to disconnect the water supply. You’ll need a pair of needle nose pliers and a screwdriver to complete the repair. Make note that brackets typically wear down at the same rate, so be sure to check both brackets and replace both if needed.

Replacing your dishwasher’s mounting brackets is a simple way to get your dishwasher running like normal.

Have any of these problems? These brackets can help:

• Door won’t latch shut
• Door won’t close
• Noisy dishwasher

Part 8269145 is a functional equivalent for part numbers: 8269145, WP8269145, AP3039168, PS393134, 830941, AH393134, and EA393134.

Compatibility

It works with top dishwasher brands and many of their models. These include:

• Whirlpool
• KitchenAid
• Kenmore
• Maytag
• Jenn-Air
• Amana
• Estate
• Magic Chef
• Inglis
• Crosley
• Roper

Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number for your dishwasher.

Introducing E-Z DISHWASHER BRACKET Made in USA from 22 gauge galvanized steel Eliminates dishwasher anchoring problems Accommodates virtually any dishwasher Easy installation under any type of counter top Can be installed prior to or after counter top installation Dishwasher does not have to be present at jobsite Won’t damage expensive cabinetry like kits that anchor to sides alone Eliminates return trip by counter top installer to anchor dishwasher Saves time AND money! About E-Z DISHWASHER BRACKET Construction Ventures is a family owned corporation based in Williamson County, Tennessee. Michael Peay and Sam Moss, the company principals and contractors, have 50+ years of combined experience in the development/building industry. They are very hands-on and are always available for trouble shooting on their jobs. They are constantly looking for new and more efficient ways of doing things. Throughout the years they have had many problems with getting dishwashers anchored correctly. Problems also occurred if the dishwasher was not on site at the right time. This led Michael to design the E-Z Dishwasher Bracket. The bracket eliminates many of the problems associated with anchoring dishwashers and is great for installation either before or after counter top installation. The feedback from other builders and counter top installers has been very positive. The bracket is easy to install and eliminates callbacks for dishwasher anchoring, which saves time and money.

SPECIFICATIONS
Works with the following models:
8212560 : Kenmore – 665.12833K311, 665.13253K110, 665.13922K010, 665.13923K010,etc.
8269145: Kenmore – 665.12776K311, 665.12782K311, 665.12833K311, 665.13173K705,etc.

Replaces part numbers:
8212560 replaces 120108, AP3953705.
8269145 replaces WP8269145, WP8269145VP

Works with most top name brands: Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Crosley, Roper

Fixes the following symptoms:
Door latch failure
Door won’t close

Count on our 8212560 & 8269145 Dishwasher Side Mounting Bracket Kit With Screws for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Blue Stars LLC storefront — click the “Blue Stars LLC” on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility