Finding your suitable readers for vip 612 dvr cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for vip 612 dvr cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
972 reviews analysed
1. Dish DVR Cooling Fans for VIP 722/622/922/612, with thermoswitch & Multi-Speed Control
- This cooling system is designed to mount on the side of your Dish VIP DVR, over the left air vents. It will quietly pull the hot air from the chassis and exhaust it out the side.
- The system has a thermoswitch, which turns the fans on and off as needed. This temperature has been carefully selected to match your Dish DVR. The fans will stop after the DVR has cooled down.
- It has 2 high-quality, low-noise 80mm fans, with super-quiet Fluid Dynamic bearings. The fans are combined into a raised air-chamber base, which allows the fans to pull air from all your DVR’s side vents over an area of 9-3/4″ x 3.5″.
- In addition, you control the speed of the fans, with the multi-speed power controller. Recommended fan speeds for this system: The two fans (running together) are rated at 13db while moving 31 cubic feet of air per minute at 1/2 speed, or 16db & 41CFM at 2/3 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 1/4 speed = 10db/16CFM, 3/4 speed = 19db/46CFM, full speed = 22db/62CFM.
- The DVR fan unit is 9-3/4″ wide, 3.5″ tall, and 1.5″ deep (including the top grill and air-chamber base), and only requires 1/4″ of space outside the fans for air flow.
This cooling system has two high-quality, low-noise 80mm fans, with long-lasting and quiet Fluid Dynamic bearings.
It includes a thermoswitch, which turns the fans on when needed and off at other times.
A raised airchamber base lets the fan remove air from the entire vent area (9-3/4″ x 3.5″) under the mounting plate.
The system has a multi-speed power transformer, which plugs into an AC outlet.
The fan adds only 1-1/2 inches to the DVR’s width, and only needs another 1/4 inch for airflow (1-3/4 inches total).
Even when running at 1/2 speed, this fan unit can move a volume of air equal to least 20 times your Dish DVR per minute (once every 3 seconds!).
THE COOLING SYSTEM INCLUDES: 1 x dual-80mm (two fans) DISH DVR fan unit, 1 x thermoswitch (installed), 1 x multi-speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The fan unit attaches to the side of your DVR, using special adhesive snap-lock pads. You don’t need to drill any holes — just press the unit over the side air vents, and the pads will hold it in position. You can easily remove the unit and the pads, if necessary.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
2. WINSINN 40mm Fan 12V Hydraulic Bearing Brushless 4010 40x10mm for Cooling 3D Printer Extruder Hotend – High Speed (Pack of 5Pcs)
►Hydraulic Bearings – High Speed version
►High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
►Rated voltage: DC 12V
►Line length: about 1.18in / 30mm
►5 x High Speed 4010 12V Hydraulic Bearings Fan
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
3. AC Infinity MULTIFAN S4, Quiet 140mm USB Fan for Receiver DVR Playstation Xbox Computer Cabinet Cooling
- Ultra-quiet USB fan designed to cool various electronics and components.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
- Fan Size: 5.5 x 5.5 x 1 in. | Airflow: 57 CFM | Noise: 18 dBA | Bearings: Dual Ball
4. ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24
- Rated Voltage: 24V DC, Current: 0.06A
- Bearing Type: Dual Ball Bearings, low noise, long life:50000H
- Airflow: 5.07CFM, Air Pressure: 2.45mmAq, Speed: 6000PRM, Noise: 23.20dBA
- Lead Wire: fit in 2-PIN-2.5mm connector, length: 150mm / 5.90inch, Dimension: 40mm x 40mm x 10mm
- Warranty: 2-years, Package: 2x 24V DC brushless fans
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A
Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
5. MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
- Oil bearing 30000 hours
- Double roller bearing 50000 hours
- Certification: CE,UL,CUL
- Temperature of usage environment: -10℃ to +70℃
- Bearing is high precision, long life and low noise
- Size: 40 mm x 40 mm x 10 mm
- Working Voltage: DC 12V
- Working Current: 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96w
- Cable length: 280mm
4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Cable length: 280mm;
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan
6. Artidux 5V 2Wire 2Pin Replacement fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan DAHUA Heatsink Cooling Fan
1 * DaHua DVR HDCVI Camera Fan
1 * Warranty Card
1 * Thermal paste
1 * Spatula
7. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
8. Ruiling 2PCS 4010 12V 3D Printer Turbine Fan 40 4010mm DC Brushless Quiet Cooling Turbo Fan 2 Pin with 7.9In Dupont Wire
Type: 4010 fan
Wire Length: 20cm/7.9in
Rated Voltage: DC 12V
Rated Current: 0.11A+ -10%
Power consumption : 1.2W
Bearing Type: Sleeve/oil
Speed: 6500RPM+ -10%
Airflow: 7.2CFM+ -10%
Noise Level: 25dba+ -10%(quiet)
2* 12V Cooling fan
9. Wathai 40mm x 20mm 12V Dual Ball Bearing DC Brushless Cooling Fan
Package include: 1 Piece fan and mounting screws & nuts
Rated Current: 0.05A
Air flow: 7.85CFM
Bearing type: Dual ball Bearing
Cable Length: 20cm Or 8 inches
Life: 50000 hours
Weight:22g/pcs or 0.78oz
10. BAY Direct Heatsink Cooling fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin
1 * DaHua DVR HDCVI Camera Fan
1 * Warranty Card
By our suggestions above, we hope that you can found Vip 612 Dvr Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!