763 reviews analysed
1. EWK Pneumatic/Manual 6.5 Liter Oil Changer Vacuum Fluid Extractor Pump Tank Remover
Feature
- Buy One For Two Functions – The Pneumatic And Manual Two-Way Operated Oil Extractor Is A Time And Money Saver. Pay Once And Cut Down More Costs In The Long Run.
- Choose The Wiser Method – Still Looking For The Right Place To Do Extraction? The Oil Suction Pump Relieves You Of Lifting The Car, Finding A Ramp Or Crawling On The Floor. With Its Specially Designed Spout, There Will Be No Oil Drops On The Floor Of Your Garage. Let’s Keep It Simple And Clean!
- High Efficiency! The Job Can Be Done Before You Finish Your Beer – Connect The Oil Evacuator With An Air Compressor And Turn It On. The Air Operated Device Will Get Your Job Done Within 10 Minutes. （1.6L/Min)
- The Extractor Pump Suiting Everyone – Whether You Are A Diyer, Money Saver, Mess Hater, Or Simply Looking For A Great Oil Changer, This Is A Product That Makes You Regret Not Having Earlier. The Amazing Efficiency Will Exceed Your Expectations For Oil Changing.
- Best Oil Change Pump For Family – Whatever Fluids You Need To Extract, It’s Your Best Partner To Fulfill The Work. It Takes Little Strength And Deals With Cars, Marines, Boats And Lawn Mowers. ( Manual Mode Works In No Electricity Conditions)
2. DasMarine 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump + Tubes Truck Rv Boat ATV
Feature
- 【Specificaiton】: Input Voltage: DC 12V
- Wattage: 60W
- Current: 5A
- Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
- 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
- 【Package Included】: 1 x Pump
- 1 x Outlet Hose
- 1 x Inlet Hose
- 2 x Hose Clamps
- 2 x Battery Clamps
Description
Specifications:
Material: Plastic & Aluminium
Color: Black, Yellow
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Diesel Flow Rate: approx. 250L / Hour
Inlet Hose Length: approx. 155cm/61”
Inlet Hose Outer Diameter: 6mm/0.236”
Inlet Hose Inner Diameter: 4mm/0.157”
Outlet Hose Length: approx. 124.5cm/49”
Outlet Hose Outer diameter: 12mm/0.472”
Outlet Hose Inner Diameter: 10mm/0.39”
Line Length: approx. 71cm/28”
Package Weight: approx. 1070g
Package Included:
1 x Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps
3. HighFree Oil Change Pump Extractor 12V 60W Oil Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump with Hose for Boat, Tubes, Truck, RV, ATV
Feature
- 【12V 60W Oil Extractor Pump】Included: 1 x Pump
- 1 x Outlet Hose
- 1 x Inlet Hose
- 2 x Hose Clamps
- 2 x Battery Clamps
- Ideal for Motorcycles,Cars,Quads,Truck,Boat, Forklift,Generator,Tractor,Scooter and Other 12v Vehicles.
- 【Specification】: Oil Diese extractor pump’s Voltage: DC12, Maximum current: 5A, Maximum power: 60W. Perfect for quick and easy oil changes that you can do at home.
- 【Quick and Clean】Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple On/Off Power Switch, easy to use
- 【Note】This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. But pls note that NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous).
- 【Easy to Use】You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore.
Description
➤Specificaiton:
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees)
Flow Rate: approx. 1L / min
Diesel or heating oil: approx 250 L/H
Sound pressure level:70dB(A)
➤Size:
Oil Change Pump Extractor: 14*13cm
Inlet Hose Length: approx. 120cm
Inlet Hose Outer Diameter: 6mm/0.236”
Inlet Hose Inner Diameter: 4mm/0.157”
Outlet Hose Length: approx. 150cm
Outlet Hose Outer diameter: 12mm/0.472”
Outlet Hose Inner Diameter: 10mm/0.39”
Line Length: approx. 71cm/28”
➤Widely use:
Extracting motor oil from your vehicle without Mess & Specialised.
It can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
➤Easy Installation:
Place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.
This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
➤WARNING:
This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running.
We recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool.
➤Package Included:
1 x Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps
4. Lotyes Oil Change Pump Extractor, DC 12V 60W Diesel Fluid Oil Quick Extract Transfer Pump Scavenge Suction Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles
Feature
- Efficient Extraction Pump: To pump your motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed. Lotyes oil change pump replaces manual operation and works by connecting the clamps to the vehicles 12V battery. It’s high efficiency, rapid and saving effort.
- Clean and Tidy: An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent leakage during the extraction process.
- Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on.
- Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC).
- What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk-free purchase.
5. OEMTOOLS 24389 Manual Fluid Extractor 179.2 Ounces
Feature
- MULTIPURPOSE EXTRACTOR: Designed to extract engine, transmission and lubricating oils from cars, motorcycles, marine engines and industrial machinery.
- VERSATILE APPLICATIONS: Extracts oil, power steering fluid and low-viscosity fluids, such as water and coolant.
- EASY-TO-USE: Includes 5 feet of flex hose and (2) specialized dipstick adapters to extract fluids directly from the dipstick tube.
- MINIMIZE CLEAN-UP TIME: 1.4 Gallon fluid reservoir features a dependable single-piece construction to drastically reduce oil and fluid spills during fluid maintenance jobs.
- OVERFLOW PROTECTION: Shut-off valve prevents fluids from overflowing.
Description
The OEMTOOLS fluid Evacuator has a 1.4 gallon (5.6 Quarts) reservoir with hand operated pump to tackle Big jobs and can be used to extract most fluid types: engine oil, transmission fluid, gear oil, coolant, power steering fluid.
6. 12V 60W Vacuum Transfer Pump Extractor Oil Fluid Diesel Electric Siphon with Hose for Car Boat Motorbike
Feature
- 5L oil liquid suction pump extractor,Small size, easy to carry and storage
- Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V
- Pump Diameter: Approx. 4.8cm, Cable Length: Approx. 30cm, Clips Length: Approx. 8cm
- Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries
- Pls use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump
Description
Specification:
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Cable Length: Approx. 30cm / 11.8inch
Clips Length: Approx. 8cm / 3.15inch
Outlet PVC pipe Length:150cm
Nylon pipe Length:100cm
Brass pipe Length:70cm
Package include:
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe
How to use:
1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean
If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out
Note: If you want to connect this pump to AC power, you will need a power converter.
7. Oil Change Pump Extractor, 12v 60w Oil Extractor Pump Oil Pump Extractor, Diesel Fluid Scavenge Suction Oil Transfer Pump for Changing Oil, Oil Change Pump for Boat, Tubes, Truck, RV, ATV, Riding Mowe
Feature
- QUICK AND CLEAN OIL CHANGES – Transfer pump for changing oil. Extracting Motor Oil From Your Vehicle Without Mess & Specialized Tools Extract The Oil from Your Car, Motorcycle, Scooter, Marine, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, riding mower, snowmower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- ENGINE OIL CHANGE MADE EASY! – The 12v oil extractor pump are very easy to use and makes a top down oil change so easy. Pumps oil out throw dip stick, no need to lay under your car. Ideal oil change pump extractor equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple On/Off Power Switch, easy to use. Great for a quick oil change.
- FOR DIFFERENTIAL FLUID AND TRANSMISSION FLUID – This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- PROFESSIONAL OIL CLEANING TOOL – The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc). Suitable for extracting oil, diesel etc from a vehicle, (never use for petrol), greatly to help your oil-cleaning task, saving time.
- 100% CUSTOMER SATISFACTION GUARANTEED – 1MANNEW OIL CHANGE PUMP EXTRACTOR – 12 Volt / 5 Amp DC Motor.Ideal Transfer Pump for your quick and clean oil-changes.The oil will simply draw out the motor through the oil dipstick bore
- If you are not satisfied with engine oil extractor pump, feel free to contact us for solutions.
Description
EXCELLENT 12V MOTOR OIL DIESEL EXTRACTOR SCAVENGE SUCTION TRANSFER CHANGE PUMP
NO MORE JACKING OF VEHICLES OR REMOVING DRAIN PLUGS.
Works Quickly For Pumping Out Motor Oil
Great value for a simple, low-cost pump for ocassionally transferring automotive fluids such as automatic transmission fluid and differential gear oil.
The oil suction pump extractor worked very well to pump out old fluid and then pump in new fluid in an automatic transmission — much easier than using a manual hand pump.
Best Sucker Of Oil
This electric pump can be used to “draw” and “push” fluids, depending on which side of the pump (input or output) you connect the hose.
Specifications:
Material: Plastic & Aluminium
Color: Black, Yellow
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Diesel Flow Rate: approx. 250L / Hour
Inlet Hose Length: approx. 155cm/61”
Inlet Hose Outer Diameter: 6mm/0.236”
Inlet Hose Inner Diameter: 4mm/0.157”
Outlet Hose Length: approx. 124.5cm/49”
Outlet Hose Outer diameter: 12mm/0.472”
Outlet Hose Inner Diameter: 10mm/0.39”
Line Length: approx. 71cm/28”
Package Weight: approx. 1070g
Package Included:
1 x oil change pump extractor
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clam
8. ATPTOOL12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transf
Feature
- 【Specificaiton】: Input Voltage: DC 12V
- Wattage: 60W
- Current: 5A
- Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
- 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- 【Package Included】: 1 x Pump
- 1 x Outlet Hose
- 1 x Inlet Hose
- 2 x Hose Clamps
- 2 x Battery Clamps
- 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
Description
Features:
Specifications:
Material: Plastic & Aluminium
Color: Black, Yellow
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Diesel Flow Rate: approx. 250L / Hour
Inlet Hose Length: approx. 155cm/61”
Inlet Hose Outer Diameter: 6mm/0.236”
Inlet Hose Inner Diameter: 4mm/0.157”
Outlet Hose Length: approx. 124.5cm/49”
Outlet Hose Outer diameter: 12mm/0.472”
Outlet Hose Inner Diameter: 10mm/0.39”
Line Length: approx. 71cm/28”
Package Weight: approx. 1070g
Package Included:
1 x Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps
9. Lotyes Quick Oil Change Pump, DC 12V 60W Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles
Feature
- Efficient Extraction Pump: To pump your motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed. Lotyes oil change pump replaces manual operation and works by connecting the clamps to the vehicles 12V battery. It’s high efficiency, rapid and saving effort.
- Clean and Tidy: An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent leakage during the extraction process.
- Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on.
- Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC).
- What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk-free purchase.
Conclusion
By our suggestions above, we hope that you can found Vacuum Pump For Boat Oil Change for you.Please don’t forget to share your experience by comment in this post. Thank you!
