606 reviews analysed
1. Dryer Duct Cleaning Kit- Generic Vacuum Hose Attachment Flexible and 30 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush/Radiator Brush. Fits Vacuum Hoses 1 1/4 inches or Less
Feature
- You will receive – one flexible 24 inch crevice tool cleaner with 3 adapters and one long 30 inch brush
- VACUUM ATTACHMENT: 24″ Long – The tip width measures 5/8 inch check with of area you want to clean. With supplied adapters fits vacuum hoses up to 1 3/4 inches ** Does not fit Dyson **
- You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. You’ll probably say these REALLY are the Worlds Greatest Adapters.????
- BRUSH SPECS: Full Brush Length: 30” – Without Handle: 24-1/4” – Bristles Diameter: 1-1/2” – Steel Wire Diameter: 3/8” – Brush color: black – Handle Color: black – Longer than other brands.
- BRUSH USES: Clean your dryer lint trap, fridge coils/ condenser coils, exhaust vents, AC vents, radiators and under your appliances. Bends like a lizard in your dyer lint trap but is not too flimsy.
2. EZ SPARES 25-inch Flexible Vacuum Crevice Attachment Crevice Tool Crevice Brush Tool Kit for All 1-1/4" or 1-3/8"(32mm-35mm) Vacuum Hoses
Feature
- Made of High Quality material：25″ Long ,Flexible，fits all vacuums accepting 1 1/4″ (32mm) or 1-3/8″(32mm-35mm) inner diameter attachments.
- Crevice tool：Great for corner, heating ducts, under furniture, along side the refrigerator.
- Flexible bends up to 180 degrees: Don’t worry about trying to contort or bend to reach those spots.”Put the brush into hot water.Soak for a while,take out and drain off.The brush will get straight.”
- Easy to clean：If you want to wash, just rinse with water.
- The brush is TPR material.Good quality and long service life.
3. Dryer Vent Cleaner Kit Vacuum Hose Attachment Brush Lint Remover Power Washer and Dryer Vent Vacuum Hose
Feature
- [Remove LINT BUILD-UP] – Sealegend dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
- [More than 28” long] – Flexible and handy vacuum hose attachments over 28inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can’t move.
- [SUCTION CONTROL] – Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- [HELPS PREVENT FIRES] – Using Sealegend Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- [Package Contains] – 1* Sealegend dryer vent cleaner kit
4. Holikme 5 Pack Dryer Cleaning Kit General Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush and 2 Adapters
Feature
- ✔ 5 Pack Complete Dryer Lint and Dryer vent Cleaner kit. Packege Including : 29inch long flexible Dryer lint cleaning brush, 25inch flexible nozzle hose attachment, Round Dusting Brush Soft Horsehair Vacuum Attachment，1.25inch(32mm) to 1.38inch(35mm) Vacuum Adapter and Dy-s-on Vacuum Adapter
- ✔ Improve Dryer Efficiency: Improving cloth dryer working performance by using this brush to cleaning the trapped lint and dust in dryer gap and exhaust port.
- ✔ Reduce Potential Disasters:Preventing fire risks of your beautiful house by using this brush to clean the buildup lint in the cloth dryer vent pipe.
- ✔ * ✔ Universal Support（2 Adapters）: One Adapter is for general Vacuum which 1.25inch(32mm) and 1.38inch(35mm) vacuum hoses. Second is Dy-s-on adapter fit for DC44, DC48, DC52, DC58, V6, not fit for V7/V8/V10
- ✔ Satisfaction Guaranteed – Every Holikme Dryer vent cleaning Product is good working performance and quality guaranteed.
5. Flexible Extension Hose Attachment for Dyson V8 V7 V10 V11 Absolute Animal Trigger Motorhead Cordless Vacuum Cleaner Accessories（20 To 60 Inches)
Feature
- Compatible with Dyson V8 V7 V10 V11 Absolute, Animal, Trigger, Motorhead
- Fits non-motorized accessories for Dyson V8 V7 V10 V11
- CAN NOT POWER ANY MOTORIZED PARTS
- East to Use: Directly connect the hose to vacuum, no additional adapter needed.
- Up to 63 Inches: Can extend to 63 inches to reach more area. Natural length: 20.5 inches.
- Quick Release:With a quick release button lock to ensure the tool fit and stay still on the vacuum won’t fall.
- Smoothly Connect No Stuck:when the hose connect to the vacuum and any other accessories for Dyson V8 V7 V10 V11 ,it will smoothly slide in and out ,won’t stuck.
6. Dryer Cleaning Kit – Generic Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush. Fits vacuum hoses 1 1/4 inches or less -by Mountain Trades
Feature
- You will receive – one flexible 24 inch crevice tool cleaner and one long 28 inch brush
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. ** Important – your vacuum hose needs to have a diameter of 1.25 or less to fit)** Does not fit Dyson ** See Description below for info on Shark Vacuum Cleaners. (measure the Shark vacuum hose to make sure it is 1.25 inches or less)
- Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas like down in your lint trap.
- Both the hose attachment and the lint brush are flexible. If the weather is cold when you receive the crevice tool it may be a little stiff, as it warms to room temperature it will become flexible.
Description
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.
7. Dryer Vent Cleaner Kit Vacuum Hose Attachment Brush Lint Remover Power Washer and Dryer Vent Vacuum Hose (Purple)
Feature
- [Remove LINT BUILD-UP] – Sealegend dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
- [More than 33” long] – Flexible and handy vacuum hose attachments over 33inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can’t move.
- [SUCTION CONTROL] – Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- [HELPS PREVENT FIRES] – Using Sealegend Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- [Package Contains] – 1* Sealegend dryer vent cleaner kit.
8. Huiaway Universal 32mm 1-1/4 inch Vacuum Attachments 1-3/8 inch Vacuum Wand Vacuum Hose Adapter Fit Most Vacuum Cleaner Fits Shop Vac Accessories Hose Household Cleaning Kit
Feature
- Vacuum cleaner attachment are suitable for most standard size vacuum hoses. The blue part is removable for smaller or larger hoses
- These vacuum cleaner attachment do not fit most Dyson and Hoover brands vacuum cleaner
- The vacuum cleaner is suitable for: 32mm & 35mm inner diameter vacuum cleaner hose,Please check the diameter of your vacuum cleaner hose
- All Vacuum parts are made of good quality material. They are usable in a long time
- These accessory are flexible.You can use these vacuum attachments to clean any part of your home, such as : Keyboard, any gaps, shutter, sofa, vent, drawer, car, pet dust, and so on
9. Beacozofu Dryer Cleaning Kit Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush. Fits Vacuum Hoses 1 1/4 inches or Less
Feature
- The Bundle Includes: One 24 inch Flexible Dryer Vent Hose Attachment and One 28 inch Dryer Lint Brush.
- Hose attachment is 24″ Long, Inside Nozzle Fits 1 3/8 Inches(35mm), Fits All Vacuum Hoses with 1.25 Inches or Less Diameter.Does Not Fit for Dyson.
- Dryer Brush Total Length 28 Inches, Without Handle: 23.5 Inches, Bristles Diameter: 1.5 Inches. Steel Wire Is Strong Yet Flexible Enough For Lint Removal.
- The Dryer Vent Vacuum Attachment Is Flexible But Not Flimsy, Easy Reach for Little Spaces, Medium Hose Diameter Provide Better Air Flow Than Other Brands.
- Removing Lint Buildup in Your Dryer Duct Shortens The Drying Time and Improves Dryer Performance, Which Extending The Life of Your Dryer.
Description
100% Satisfaction and Money Back Guarantee-Long Dryer Lint Cleaning Brush + Flexible Crevice Tool
Specifications:
Duct cleaning brush kit: Length: 28 inches Bristle Diameter； 1.5 inches
Dryer vent Never Clogged Again, Low energy consumption and Safe Running.
Vacuum Hose Attachment: Length 24 inches Tapered Tip: 15mm Width
You can Dip the hose end into warm water to ensure an easy inserting.
The Hose Attachment Does not fit for Dyson vacuum cleaners, Fits well for Most Vacuum Hoses with a diameter less than 1.25″ , Like Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. For Shark Navigator and Shark Swivel Steering, it will fit inside the hose but is not a tight fit, but still works.
Some of the Shark Vacuums it will not fit: Shark Professional.
If you are not sure if it will fit your Shark vacuum or any vacuum you have, please ask a question and we will respond.
This is not an Shark Original product and is not covered under any Shark warranty.
The Shark brand name and logo are the registered trademark of the respective owner.
Any use of the Shark brand name, model or part designation for this product is made solely for purposes of demonstrating compatibility.
Conclusion
By our suggestions above, we hope that you can found Vacuum Hose Attachment Flexible for you.Please don’t forget to share your experience by comment in this post. Thank you!
