Top 10 Smart Choice Granite Countertop Dishwasher Installation Kit

This undercounter mounting bracket for dishwashers is for solid surfaces like granite. Works with all standard size dishwashers. Can also be used on all stainless and plastic tall tub platforms.

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Introducing E-Z DISHWASHER BRACKET Made in USA from 22 gauge galvanized steel Eliminates dishwasher anchoring problems Accommodates virtually any dishwasher Easy installation under any type of counter top Can be installed prior to or after counter top installation Dishwasher does not have to be present at jobsite Won’t damage expensive cabinetry like kits that anchor to sides alone Eliminates return trip by counter top installer to anchor dishwasher Saves time AND money! About E-Z DISHWASHER BRACKET Construction Ventures is a family owned corporation based in Williamson County, Tennessee. Michael Peay and Sam Moss, the company principals and contractors, have 50+ years of combined experience in the development/building industry. They are very hands-on and are always available for trouble shooting on their jobs. They are constantly looking for new and more efficient ways of doing things. Throughout the years they have had many problems with getting dishwashers anchored correctly. Problems also occurred if the dishwasher was not on site at the right time. This led Michael to design the E-Z Dishwasher Bracket. The bracket eliminates many of the problems associated with anchoring dishwashers and is great for installation either before or after counter top installation. The feedback from other builders and counter top installers has been very positive. The bracket is easy to install and eliminates callbacks for dishwasher anchoring, which saves time and money.

Frigidaire L304458800 dishwasher granite countertop installation bracket kit genuine original equipment manufacturer (oem) part, granite

NO GLUE NO DRILL NO MESS SIMPLE LASTING SECURE HOW IT WORKS Granite Grabbers worked to develop an adhesive tape, capable of adhering permanetly to the various rough and unfinished surfaces found on the bottom of Granite and other solid surface countertops. The one piece aluminum Granite Grabber system, includes a built in threaded nut to accept the supplied maching screw, so the hole will never strip out as many times as the Dishwasher may need to be removed and reset. The end result is a super low profile, one piece bracket, capable of being installed with NO DRILLING, NO GLUING, NO MESS.

2 Packs 8212560 dishwasher side brackets and 4 packs installation screws and 2 packs 8269145 dishwasher upper mounting brackets and 2 packs installation screws

8212560 Dishwasher side mounting bracket:
Material: metal
Quantity: 2 packs mounting brackets and 4 pieces install screws
Replace for part No.: 1201084, AP3953705
Color: black

8269145 Dishwasher upper mounting bracket:
Material: metal
Quantity: 2 packs upper mounting brackets and 2 packs install screws
Replace for part No.: WP8269145, WP8269145VP
Color: sliver

Practical to use:
Compatible with various most top name brands such as KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Roper.

Features:
Good quality and can be applied for a very long time.

Package includes:
2 x 8212560 Dishwasher side mounting bracket
4 x Installation screws
2 x 8269145 Dishwasher upper mounting bracket
2 x Silver installation screws

Warmly note:
Not original parts, the mention of any related models and brands above is only for purposes of demonstrating compatibility.

12-Pack undercounter dishwasher upper mounting bracket replacement and 24 installment screws, dishwasher undercounter mounting kit

Many features:
Replace part numbers: compatible with 8269145/ WP8269145, AP3039168, PS393134, 830941, AH393134, EA393134, sufficient quantity for you to replace the old or broken one.

Easy to install:
The dishwasher bracket kit can be installed quickly and easily with a screwdriver and needle-nosed pliers, saving the hassle and time.

Compatible with:
These dishwasher replacement parts compatible with Sears, Kenmore, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef and other dishwashers.

Specification:
Color: as the pictures shown
Material: durable steel
Size: 1 x 1.6 inch

Package includes:
12 x Undercounter dishwasher upper mounting bracket replacement
24 x Installment screws

Pleased note:
This is an aftermarket product (not original ), the mention of any related models and brands above is only for purposes of demonstrating compatibility.

Introducing E-Z DISHWASHER BRACKET Made in USA from 22 gauge galvanized steel Eliminates dishwasher anchoring problems Accommodates virtually any dishwasher Easy installation under any type of counter top Can be installed prior to or after counter top installation Dishwasher does not have to be present at jobsite Won’t damage expensive cabinetry like kits that anchor to sides alone Eliminates return trip by counter top installer to anchor dishwasher Saves time AND money! About E-Z DISHWASHER BRACKET Construction Ventures is a family owned corporation based in Williamson County, Tennessee. Michael Peay and Sam Moss, the company principals and contractors, have 50+ years of combined experience in the development/building industry. They are very hands-on and are always available for trouble shooting on their jobs. They are constantly looking for new and more efficient ways of doing things. Throughout the years they have had many problems with getting dishwashers anchored correctly. Problems also occurred if the dishwasher was not on site at the right time. This led Michael to design the E-Z Dishwasher Bracket. The bracket eliminates many of the problems associated with anchoring dishwashers and is great for installation either before or after counter top installation. The feedback from other builders and counter top installers has been very positive. The bracket is easy to install and eliminates callbacks for dishwasher anchoring, which saves time and money. Please measure your dishwasher before placing your order. This size is for 18″ dishwashers. For larger dishwashers up to 24″, please check our 24″ E-Z Dishwasher Brackets