The Best Shark Bite 34 Female

Product Description

SharkBite Push-to-Connect Brass Female Adapter – Female iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F. , 200 P. S. I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0. 25% weighted average lead content on wetted surfaces. – Size: 3/4 In. x 3/4 In. FNPT, Material: Brass, Pressure Rating: 200 psi, Type: Push Adapter, Temperature Rating: 200 F, Pkg Qty: 1, Package Type: Bag Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov. –

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

SharkBite Water Heater Installation Kit

This kit is designed to streamline water heater installation including special corrosion resistant DZR brass push-to-connect fittings that allow you to connect water distribution pipe in seconds with ease.

This kit includes:

• 2 – 3/4″ x 3/4″ FNPT coupling
• 1 – 3/4″ Disconnect Clip

CUT. PUSH. DONE.
The SharkBite Water Heater Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

1/2 inch x 3/4 inch female iron pipe, lead free connector, Shark Bite push fit fittings for use with copper tubing cts, cpvc & PEX with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to ASSE1061/Nsf61 standards, meets upc, ipc & cupc requirements, fittings are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panels, lead free Compliant to federal law 111-380, bagged.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

CUT. PUSH. DONE. This item is a SB U314LFA 3/4 inch female pipe thread. Best for rough plumbing, pipe and conduit. This product is manufactured in Australia. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting’s stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal. No soldering, no clamps, no glue. SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results.

Product Description

Easily connect pipe in seconds with the SharkBite Push-To-Connect 3/4-Inch Straight Coupling. This plumbing fitting joins copper, PEX, CPVC, HDPE, or PE-RT pipe in any combination. With no soldering, clamps, or glue required, connections are as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the simple SharkBite disconnect tool. The SharkBite Straight Coupling is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

SharkBite3/4 Inch by 3/4 Inch Straight Male Connector Connect pipe in seconds with relative ease using the SharkBite Push-To-Connect 3/4-Inch by 3/4-Inch Straight Male Connector with MNPT Adapter. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. CUT. PUSH. DONE. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue. Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results. SHARKBITE is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.

SharkBite uses high quality forged lead-free brass for their 3/4″ x 3/4″ brass ball valve with a single ball valve handle. Quick and Easy to attach to your water faucet project. SharkBite Ball Valve can be easily rotated after installation making it a cinch to shut off water in an emergency or work in tight spaces.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite 22186-0000LF Ball Valve w/ Integral SharkBite Connectors 3/4-Inch x 3/4-Inch FNPT Full Port Brass Lead Free

Product Description

When transitioning pipe size, there is no easier way than with SharkBites push-fit reducing couplings. There is no need for solder, glue, clamps or unions, simply push-to-connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. It is also rated to 200F and 200 psi. 3/4″ x 1/2″ For use with copper tubing CTS, CPVC & Pex with integral tube liner included Constructed of DZR brass Certified to 200 PSI & 200 degrees fahrenheit Design certified to ASSE1061/NSF61 standards Meets UPC, IPC & CUPC requirements Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution Certified for underground applications & as a manufactured joint without the need for access panels Lead free compliant to federal law 111-380 Bagged.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

Product Description

SharkBite 1/2″ Female Connector
Connect pipe in seconds with relative ease using the SharkBite Push-To-Connect 1/2-Inch Female Straight Coupling. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, it’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. The SharkBite Straight Coupling Plumbing Fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.