Top 10 Oven Thermostatic Switch

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)

Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)

Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)

Package Content:
1x WH1436A Temperature controller
1x sensor cable

Product Description

Specification: • Overall Dimension: 8.2 x 5.5 x 3 inches • Item Weight: 9.6 ounces • Power Source: Corded-electric The Dual Thermostat and Humidistat is designed for use with Power Attic Ventilators. The dual controls allow for a user to limit the operation of the fan based on user selected temperature and humidity levels. This item is often called a Duostat and is an essential tool for homeowners to regulate the temperature and humidity levels while preventing their power attic ventilator from running in continuous operation mode. The Duostat allows for worry free operation during both winter and summer months by allowing the homeowner to not manually turn on and off their attic fan when needed. This Ventamatic Dual Temp/Humidity Control helps power attic ventilators equalize inside and outside attic temperatures to remove excess heat from your attic in summer and humidity in winter. Accessory Type Ventilation accessory. Year-round control removes excess humidity and protects roofing components Controls up to three units, not to exceed 10 amps.

From the Manufacturer

Dual thermostat/humidistat adjustable 10 amp control. For the energy efficient control of roof or gable power attic ventilators. Temperature range from 50 to 120 Degrees Fahrenheit. Humidity range from 30 to 90 percent.

The NETGEAR GS108Tv3 8-Port Gigabit Smart Managed Pro Switch comes with 2 dedicated SFP ports for fiber uplinks. Fan less, the GS108Tv3 supports perfectly silent desktop operation or wall mounting. The GS108Tv3 Smart Managed Pro Switch offers an easy-to-use, Web browser-based management GUI with configurable L2 network features like VLANs and QoS, allowing SMB customers to deploy VoIP phones and IP surveillance. This switch also comes with NETGEAR Insight Cloud management activation (subscription-based) for anytime remote management and monitoring through an intuitive app or Cloud Portal. Advanced features such as Layer 3 static routing including IPv6 management, ACL, Differ QoS, LACP link aggregation and Spanning Tree will satisfy even the most advanced small business networks. The GS108Tv3 features Energy Efficient Ethernet (IEEE 802. 3az) for maximum power savings and is backed by NETGEAR ProSAFE Limited Lifetime and 24/7 support including lifetime chat.

The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.

Model for this listing: SYL-2352P

This is a brand new, dual display, 1/16 DIN sized (1.89×1.89″ or 48 x 48 mm) programmable PID temperature/process controller. This controller is for applications where it is desirable to have the set point automatically adjust itself over time. Up to 30 steps can be programed to A) ramp the temperature up or down at controlled rate, B) Maintain the temperature for a specific period time, C) turn on/off the relays (alarm relay) after process reaches a specific step.

This controller has all the features of the standard PID controller (except the manual control). The dual alarm relay can be activated either by the temperature set point or by program steps. They can be used for interlock other equipments in the process. Multiple programs can be stored as long as the total steps is less or equal to 30 steps. If you don’t need the ramp/soak action, please see my other listing for PID controllers without ramp/soak.

Main Specifications:
Input type: TC: K, E, S, WRe, J, T, B, N RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm. DC voltage:0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V. DC current: 4~20mA.
Input range: K (32~2300ºF), S (32~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF), J (32~1800ºF), B (32~3300ºF), N (32~2400ºF) Pt100 (-320~1100ºF), Cu50 (-60~300ºF) Linear input: -1999~+9999 defined by user
Display: Two lines, Four digits. °F or °C.
Display Resolution: 1°C and 0.1 °C. or 1°F,
Control mode: Fuzzy PID, On-Off
Output mode: 12VDC for external SSR
Overall dimension: 48 x 48 x 107mm.
Depth after mounting panel is 100mm.

This unit has 12VDC output for controlling an external solid state relay or SSR.

Manual: goo.gl/T0Tyjj
Basic Tutorial Video: https://youtu.be/6h139MgGvnY
Programming Video: https://youtu.be/raxscrYmxhg
Customer Support Line: 770-569-8420