Top 9 Maytag Dishwasher Side Mounting Clips

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.

FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.

INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.

WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws

100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item

2 Packs 8212560 dishwasher side brackets and 4 packs installation screws and 2 packs 8269145 dishwasher upper mounting brackets and 2 packs installation screws

8212560 Dishwasher side mounting bracket:
Material: metal
Quantity: 2 packs mounting brackets and 4 pieces install screws
Replace for part No.: 1201084, AP3953705
Color: black

8269145 Dishwasher upper mounting bracket:
Material: metal
Quantity: 2 packs upper mounting brackets and 2 packs install screws
Replace for part No.: WP8269145, WP8269145VP
Color: sliver

Practical to use:
Compatible with various most top name brands such as KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Roper.

Features:
Good quality and can be applied for a very long time.

Package includes:
2 x 8212560 Dishwasher side mounting bracket
4 x Installation screws
2 x 8269145 Dishwasher upper mounting bracket
2 x Silver installation screws

Warmly note:
Not original parts, the mention of any related models and brands above is only for purposes of demonstrating compatibility.

Replaces the following part numbers:
WP8269145, WP8269145VP.

Works for brands:
KitchenAid, Whirlpool, Kenmore, Maytag, Jenn-Air, Amana, Estate, Magic Chef, Inglis, Crosley, Roper.

Fixes problem with:
Door latch failure.
Door won’t close.

Contact Us
If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the Discount Parts Direct storefront.

Business Wholesale
We are a small local company from Houston, Texas offer discount parts for retail and wholesale. If you need to purchase parts for business , please contact us for lower rates.

1) Turn off power to dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) and turn off water supply. 2) Pull dishwasher out from its place. 3) Remove upper screw from side of dishwasher. Align last hole of bracket on long flat part of bracket with screw hole. Reinsert & tighten removed screw or one of new provided screws. 4) Push dishwasher back into place. Open dishwasher door. Determine which bracket hole you will use. You want to use the farthest hole forward that still attaches to cabinet. If using holes on the smaller flat part of bracket, see 5A-6A. If you need to use back hole, see 5B-9B. 5A) If using front hole, leave bracket as is. If using 2nd hole, use 1 pair of pliers to hold bracket at the 2nd hole & 1 pair of pliers to break off front tab. Repeat. Push dishwasher back into place. 6A) Pre-drill screw holes to avoid splitting wood. Screw brackets into place using provided screws. DONE! 5B) If you cannot use either of front two holes on bracket, you will need to drill a hole in the tub. Use a sharpie to mark through back bracket hole on dishwasher. Repeat. Remove both brackets. 6B) Using 2 sets of pliers, break off both brackets before bend. 7B) Drill 3/8 inch hole through each side of plastic tub. Hold plastic tightly right below mark & use a drill slowly to ensure you have a nice clean hole without damaging the tub. Clean up both holes with razor blade until smooth. 8B) Put brackets back on, put dishwasher back into place. Pre-drill small holes into the cabinet wood, then screw in included screws on each side. 9B) Insert plastic plugs in each hole. Run dishwasher & check for leaks. If leaks are present, you may need to add rubber cement to plastic plugs to create a seal. This is a generic product manufactured & distributed by Impresa Products (TM). This is not a Frigidaire (TM) / Electrolux (TM) OEM product. Any use of Frigidaire (TM) or Electrolux (TM) brand names, models, etc. are made solely to describe & illustrate compatibility.

 DD94-01002A Dishwasher Assembly-Install Kit fit for Samsung Dishwasher Mounting Bracket.

This filter fits models:DMT400RHS/XAA,DW7933LRASR/AA-0001, DW80K5050US/AA-01,DW80F600UTS/AA-01,DW80F800UWS/AA-01,DW80F600UTW/AA-01,DW80J3020UB/AA-00,DW80J3020US/AA-00,DW80J3020UW/AA-00,DW80K5050UB/AA-00,DW80K5050UG/AA-00,DW80K5050US/AA-00,DW80K5050US/AA-02,DW80K5050US/AA-03,DW80K5050UW/AA-00,DW80K7050UG/AA-00.

A Revolutionary Solution for Quickly and Securely Installing Dishwashers Under Granite or Other Solid-Surface Countertops. Works on all Solid Surface Countertops! Simple, Fast, Secure – Not only is the Granite Grabber system simple and easy to install, it takes only minutes to position and adhere to the countertop. Once installed, the exclusive Granite Grabber adhesive sets within 5 minutes and forms a permanent bond within 1 hour. Vibration Resistant – The unique Granite Grabber system provides a strong, secure vibration resistant solution that does not compromise the integrity of the solid surface countertop. No more unsecured,tipping Dishwasher No unsightly wood glued underneath your finished countertops No drilling into that expensive countertop or beautiful cabinetry. NO GLUE NO DRILL NO MESS SIMPLE LASTING SECURE HOW IT WORKS Granite Grabbers worked to develop an adhesive tape, capable of adhering permanetly to the various rough and unfinished surfaces found on the bottom of Granite and other solid surface countertops. The one piece aluminum Granite Grabber system, includes a built in threaded nut to accept the supplied machine screw, so the hole will never strip out as many times as the Dishwasher may need to be removed and reset. The end result is a super low profile, one piece bracket, capable of being installed with NO DRILLING, NO GLUING, NO MESS.