Top 10 Lg Dishwasher Side Mounting Bracket

2 Packs 8212560 dishwasher side brackets and 4 packs installation screws and 2 packs 8269145 dishwasher upper mounting brackets and 2 packs installation screws

8212560 Dishwasher side mounting bracket:
Material: metal
Quantity: 2 packs mounting brackets and 4 pieces install screws
Replace for part No.: 1201084, AP3953705
Color: black

8269145 Dishwasher upper mounting bracket:
Material: metal
Quantity: 2 packs upper mounting brackets and 2 packs install screws
Replace for part No.: WP8269145, WP8269145VP
Color: sliver

Practical to use:
Compatible with various most top name brands such as KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Roper.

Features:
Good quality and can be applied for a very long time.

Package includes:
2 x 8212560 Dishwasher side mounting bracket
4 x Installation screws
2 x 8269145 Dishwasher upper mounting bracket
2 x Silver installation screws

Warmly note:
Not original parts, the mention of any related models and brands above is only for purposes of demonstrating compatibility.

1) Turn off power to dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) and turn off water supply. 2) Pull dishwasher out from its place. 3) Remove upper screw from side of dishwasher. Align last hole of bracket on long flat part of bracket with screw hole. Reinsert & tighten removed screw or one of new provided screws. 4) Push dishwasher back into place. Open dishwasher door. Determine which bracket hole you will use. You want to use the farthest hole forward that still attaches to cabinet. If using holes on the smaller flat part of bracket, see 5A-6A. If you need to use back hole, see 5B-9B. 5A) If using front hole, leave bracket as is. If using 2nd hole, use 1 pair of pliers to hold bracket at the 2nd hole & 1 pair of pliers to break off front tab. Repeat. Push dishwasher back into place. 6A) Pre-drill screw holes to avoid splitting wood. Screw brackets into place using provided screws. DONE! 5B) If you cannot use either of front two holes on bracket, you will need to drill a hole in the tub. Use a sharpie to mark through back bracket hole on dishwasher. Repeat. Remove both brackets. 6B) Using 2 sets of pliers, break off both brackets before bend. 7B) Drill 3/8 inch hole through each side of plastic tub. Hold plastic tightly right below mark & use a drill slowly to ensure you have a nice clean hole without damaging the tub. Clean up both holes with razor blade until smooth. 8B) Put brackets back on, put dishwasher back into place. Pre-drill small holes into the cabinet wood, then screw in included screws on each side. 9B) Insert plastic plugs in each hole. Run dishwasher & check for leaks. If leaks are present, you may need to add rubber cement to plastic plugs to create a seal. This is a generic product manufactured & distributed by Impresa Products (TM). This is not a Frigidaire (TM) / Electrolux (TM) OEM product. Any use of Frigidaire (TM) or Electrolux (TM) brand names, models, etc. are made solely to describe & illustrate compatibility.

5001DD4001A Dishwasher Mounting Brackets include two brackets, a hose clamp, and two screws.
The brackets are perforated so they can be cut or broken to the desired length if they stick out from underneath the countertop.
The accessory kit is used to mount the dishwasher to the side of the cabinet or underside of the countertop, depending on your appliance.
This kit can be used with both top or side mounting applications.

Fit Models: (To search press CRTL F and enter your model number)

Works with the following models:
LG LDF6810BB, LDF6810BB-01, LDF6810BB-02, LDF6810ST, LDF6920BB LDF6810BB LDF6810ST, LDF6810WW, LDF6920BB, LDF6920ST, LDF6920WW, LDF7810BB, LDF7810ST, LDF7810WW, LDF7932BB, LDF7932ST, LDF7932WW, LDF8812ST, LDF9810ST, LDF9932ST, LDS4821BB, LDS4821ST, LDS4821WW, LSDF795ST.

This is a compatible spare part, the brands’ names and part numbers have been mentioned above for reference purposes only.

Introducing E-Z DISHWASHER BRACKET Made in USA from 22 gauge galvanized steel Eliminates dishwasher anchoring problems Accommodates virtually any dishwasher Easy installation under any type of counter top Can be installed prior to or after counter top installation Dishwasher does not have to be present at jobsite Won’t damage expensive cabinetry like kits that anchor to sides alone Eliminates return trip by counter top installer to anchor dishwasher Saves time AND money! About E-Z DISHWASHER BRACKET Construction Ventures is a family owned corporation based in Williamson County, Tennessee. Michael Peay and Sam Moss, the company principals and contractors, have 50+ years of combined experience in the development/building industry. They are very hands-on and are always available for trouble shooting on their jobs. They are constantly looking for new and more efficient ways of doing things. Throughout the years they have had many problems with getting dishwashers anchored correctly. Problems also occurred if the dishwasher was not on site at the right time. This led Michael to design the E-Z Dishwasher Bracket. The bracket eliminates many of the problems associated with anchoring dishwashers and is great for installation either before or after counter top installation. The feedback from other builders and counter top installers has been very positive. The bracket is easy to install and eliminates callbacks for dishwasher anchoring, which saves time and money.

Compatible with the following /Zenith models:
LDF6810BB ; LDF6810ST LDF6810WW ; LDF6920BB LDF6920ST ; LDF6920WW LDF7810BB ; LDF7810ST LDF7810WW ; LDF7932BB LDF7932ST ; LDF7932WW LDF8812ST ; LDF9810ST LDF9932ST ; LDS4821BB LDS4821ST ; LDS4821WW LSDF795ST

Product Description

Set of 2 brackets. The LG 5001DD4001A 6026050 Dishwasher Mounting Bracket with Screws is compatible with the following /Zenith models: LDF6810BB LDF6810ST, LDF6810WW, LDF6920BB, LDF6920ST, LDF6920WW, LDF7810BB, LDF7810ST, LDF7810WW, LDF7932BB, LDF7932ST, LDF7932WW, LDF8812ST, LDF9810ST, LDF9932ST, LDS4821BB, LDS4821ST, LDS4821WW, LSDF795ST. Refer to your manual to ensure ordering the correct, compatible part.

From the Manufacturer

Set of 2 brackets. The LG 5001DD4001A 6026050 Dishwasher Mounting Bracket with Screws is compatible with the following /Zenith models: LDF6810BB LDF6810ST, LDF6810WW, LDF6920BB, LDF6920ST, LDF6920WW, LDF7810BB, LDF7810ST, LDF7810WW, LDF7932BB, LDF7932ST, LDF7932WW, LDF8812ST, LDF9810ST, LDF9932ST, LDS4821BB, LDS4821ST, LDS4821WW, LSDF795ST. Refer to your manual to ensure ordering the correct, compatible part.