Top 10 Hp Ssd S700 25 Inch

HP SSD S700 Pro Series delivers compact storage and optimized performance for traditional and innovative small-form-factor and embedded platforms in 3 capacity sizes: 128GB、256GBand 512GB .

The case 2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD), and enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs. This design makes it ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet; such as, notebook, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.

features
• High performance

• Low power

• Increased system responsiveness

• High reliability

• Small form-factor

• Minimum weight

• Enhanced ruggedness

Specifications Mfr Part Number: 6MC15AA#ABC Capacity: 1TB Form Factor: 2.5 inch Interface: SATA III 6 Gb/s NAND Flash: 3D TLC Latency: Read – 0.022ms; Write – 0.299ms Performance: Sequential Read Speed: Up to 561 MB/s Sequential Write Speed: Up to 523 MB/s 4K Random Read Speed: Up to 82K IOPS 4K Random Write Speed: Up to 81K IOPS MTBF: 2.0 Million Hours Power Consumption: Idle: 0.34W Active: 2.74 W Max Shock Resistance: 100G / 6 msec Max Vibration Resistance: 3.1 GRMS (2-500 Hz) Temperature: 0°C to 70°C (Operating); -40°C to 85°C (Storage) Thickness: �‰¤ 7 mm Dimensions: 100.2 x 69.8 x 7.0mm Weight: �‰¤ 80.0 g

HP 4FZ32AA#ABC Hewlett Packard SSD 4FZ32AAABC 120GB S600 2.5 SATA III 3D NAND Retail

• Model
• Brand: HP
• Series: M700
• Model: 3DV75AA#ABC
• Device Type: Internal Solid State Drive (SSD)
• Used For: Consumer
• Details
• Form Factor: M.2 2280
• Capacity: 120GB
• Memory Components: Planar MLC NAND Flash
• Interface: SATA III
• Performance
• Max Sequential Read: Up to 490 MBps
• Max Sequential Write: Up to 450 MBps
• 4KB Random Read: Up to 55,000 IOPS
• 4KB Random Write: Up to 75,000 IOPS
• Read Latency: 0.03ms
• Write Latency: 0.119ms
• MTBF: 2,000,000 hours
• Features
• High performance
• Low power
• Increased system responsiveness
• High reliability
• Small form-factor
• Minimum weight
• Enhanced ruggedness
• Environmental
• Power Consumption (Idle): 0.5W
• Power Consumption (Active): 1.48W
• Operating Temperature: 0°C ~ +70°C
• Storage Temperature: -40°C ~ +85°C
• Max Shock Resistance: 100G / 6 msec
• Max Vibration Resistance: 3.1 GRMS (2-500 Hz)
• Dimensions & Weight
• Height: 2.2mm
• Width: 22mm
• Depth: 80mm
• Weight: 5g

Get a storage solution that significantly improves boot-up, shut down, and application loading times as well as overall responsiveness. Since SSDs have no moving parts, your storage performance is no longer bound by mechanical barriers.

Specifications Mfr Part Number:  2DP97AA#ABC capacity:  120gb form factor: 2.5 inch interface: SATA 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash:  3D TLC latency: read – 0.032ms; write – 0.210ms performance: Sequential Read speed:  up to 561 MB/s sequential Write speed:  up to 511 MB/s 4K random read speed: up to 71K IOPS 4K random Write speed: up to 82K IOPS MTBF: 2.0 million hours power consumption: idle:  340 mw (typ) Max: 1.38 W (TYP) shock: operating:  100 G/6 msec Non-operating:  100 G/6 msec ‹vibration: operating:  3.1G rms (2-500 Hz) Non-operating:  3.1G rms (2-500 Hz) temperature:  0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness:  ‰¤ 7 mm Dimensions:  100.2 x 69.8 mm Weight:  ‰¤ 80.0 g

Give your computer a performance boost with the HP S700 SSD. This SATA III SSD is built with premium quality 3D NAND chips, delivering blazing-fast read/write speed that transform your everyday computing experience – the system starts up in seconds, apps launch in a flash, and multitasking is more smooth and responsive than HDD. A suite of advanced technologies is built in, like advanced wearing balancing algorithm for durability, TRIM that maintains performance over usage, and Higher Order LDPC Error Correction for data integrity and security. Plus, the 7mm thickness fits well in laptops and Ultrabooks, and all metal body is strong and acts as heatsink for better stability. New 3D NAND Technology and advanced wear balancing algorithm for higher durability @0.5 Drive Writes Per Day. Higher Order LDPC Error Correction for high speed parallel decoding and real time error correction to ensure data integrity and security. Less than 5mW power under device sleep mode for significantly reduced power usage therefore extended battery runtime Manufactured to HP’s high quality standards and fully tested and certified in HP Laboratories

Product Specifications:

Capacity
250GB

Components
3D TLC NAND Flash

Read and Write IOPS
Random 4 KB reads: Up to 55 K IOPS
Random 4 KB writes: Up to 80 K IOPS

Bandwidth Performance
Sustained sequential read: Up to 555 MB/s
Sustained sequential write: Up to 515MB/s

SATA 1.5 Gb/s ,3 Gb/s and 6 Gb/s interface
ATA/ATAPI-7
SSD-enhanced S.M.A.R.T. ATA feature
Native Command Queuing (NCQ) command set
Data set management command Trim attribute

Form Factor
Full-sized 2.5inch SSD

Power Management
5 V 2.5inch SSD power supply
2.5inch SSD interface power management

Power (Mobile Mark 2007 Workload)
Idle:340 mW(TYP)
max: 1.38W (TYP)

Temperature
Operating: 0C to 70C
Non-Operating: -40C to 85C

Shock (operating and non-operating)
100 G/6 msec
Vibration(operating and non-operating)
3.1G RMS (2-500 Hz)

Latency
Read: 0.030ms (TYP)
Write: 0.188ms (TYP)

Reliability
Uncorrectable Bit Error Rate (UBER): 1 sector in 10^16bits read
Mean Time Between Failures (MTBF): 2,000,000 hours

Certifications and Declarations
UL
CE
FCC
RoHS

Item Dimension (L inchxW inchxH inch)
4 x 3 x 1

Weight
1.00 lb

Warranty Information
3 years limited

Specifications Mfr Part Number:  2DP98AA#ABC capacity:  250gb form factor:  2.5 inch interface:  sata 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash:  3D TLC latency:  read – 0.026ms; write – 0.223ms performance: Sequential Read speed:  up to 562 mb/s sequential Write speed:  up to 516 mb/s 4K random read  speed:  up to 85K IOPS 4K random write  speed:  up to 90K IOPS MTBF:  2.0 million hours power consumption: idle:  340 mw (typ) Max:  1.38 W (TYP) shock: operating:  100 G/6 msec Non-operating:  100 G/6 msec ‹vibration: operating:  3.1G rms (2-500 Hz) Non-operating:  3.1G rms (2-500 Hz) temperature:  0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness:  ‰¤ 7 mm Dimensions:  100.2 x 69.8 mm Weight:  ‰¤ 80.0 g

HP SSD S700 series will help to protect and transfer your data files. The power consumption is less than 5mW under device sleep mode, which significantly saves system power consumption in standby status and achieves both speed and endurance. HP S700 series can help your laptop battery last longer. No moving parts within the SSD can keep your computer operating at a lower temperature and achieve nearly noiseless operation.

Protect your data files with the HP SSD S700 series
By using 3D NAND Flash and three-dimensional stacking method, HP S700 series can provide higher storage density and capacity and is more reliable and durable compared with traditional 2D NAND Flash [1].

Better performance, more durable
The advanced wear overall balancing algorithm of HP S700 series increase the TBW (Total Bytes Written) and improve the durability of SSD, which fully meet the user’s requirement for design, video editing, games programming, office and various storage applications.

Higher-order LDPC error correction, more secure and reliable storage
HP S700 series supports LDPC (Low Density Parity Check Code) error correction mechanism. It can do the high speed parallel decoding, real-time error correction, which ensures the security and integrity of data transmission; avoids performance degradation resulting from long-term use; provides long lasting high speed read and write performance.