507 reviews analysed
1. JACKSON TOOL Tri-Clamp – High Strength Pipe Alignment Tool with Lightweight Design & 2"-6" Diameter – Jackson-302
Feature
- HEAVY DUTY TRI-CLAMP – Made from high-strength alloy
- LONG-LIFE – This tri-clamp is powder coated, combine with a strong and lightweight make for increased productivity and long tool life
- VERSATILE – This tri-clamp can be used for multiple uses, fiting pipe to pipe, pipe to fitting, pipe to flange, and pipe to too
- COMPARE TO COMPETITION – Compare this product to Sumner Manufacturing Ultra Clamp 781150
- MADE IN THE USA – Proudly designed and crafted in the US
Description
Product Description
Tri clamp pipe alignment tool medium size with 2-Inch to 6-Inch capacity. Durable steel frame is ideal for jobsite use as well as in shop use. Strong and lightweight for increased productivity and long tool life. Versatile tool can be used for multiple fit ups, including pipe to pipe, pipe to fitting, pipe to flange, and pipe to tee. Compare to Sumner Manufacturing Company Ultra Clamp. Made in the USA.
From the Manufacturer
Tri clamp pipe alignment tool medium size with 2-Inch to 6-Inch capacity. Durable steel frame is ideal for jobsite use as well as in shop use. Strong and lightweight for increased productivity and long tool life. Versatile tool can be used for multiple fit ups, including pipe to pipe, pipe to fitting, pipe to flange, and pipe to tee. Compare to Sumner Manufacturing Company Ultra Clamp. Made in the USA.
2. HEATIT JHSF 80-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
Feature
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
3. SharkBite Deburring Pipe and Depth Gauge Tool, Copper, CPVC, Pipe, 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A
Feature
- SIMPLE: For depth insert the pipe into the gauge and mark the desired depth, then, rotate the tool around the pipe to remove burrs to achieve a clean edge and ensure a watertight seal
- USE: 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 1 inch copper or CPVC Pipe
- COMPATIBLE PRODUCT: Same as part number U702 and U702Z
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times
Description
Product Description
“
SharkBite Deburr & Depth Gauge Tool
Our 2-in-1 tool is designed to simplify your plumbing project when using copper or CPVC tubing. Use it to remove burrs from copper pipe or CPVC pipe and to mark correct insertion depth for SharkBite fittings. The mark is used to confirm that the fitting is seated correctly to ensure a watertight connection.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. No soldering, clamps, glue required. It’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. The Shark Bite PEX tubing cutters are an integral tool in the easy-to-install SharkBite Connection System.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
“
From the Manufacturer
The Cash Acme U702A Shark Bite Deburring and Depth Tool is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
4. M-D Building Products 4309Pipe Heating Cable with Thermostat, 3-Foot
Feature
- This item is a M-D Building Products 4309 3-Foot Pipe Heating Cable with Thermostat
- Purpose of use for Rough Plumbing, pipe-heat-cables
- This product is manufactured in China
- Prevents frozen water pipes to -50°F
- Easy to install just “wrap around” application
- Sensor light shows thermostat is working
- Available in 6 different lengths
- Built in thermostat
Description
Product Description
This item is a M-D Building Products 4309 3-Foot Pipe Heating Cable with Thermostat. Purpose of use for Rough Plumbing, pipe-heat-cables. This product is manufactured in China.
From the Manufacturer
M-d building products 04309 3′ pipe heating cable with thermostatm-d building products 04309 3′ pipe heating cable with thermostat features: ul and csa approved pipe heating cable designed to prevent water line freeze up ready to install, grounded cord and plug, thermostat controlled, with pilot light 3′. No wrap needed.
5. PHOENIX CABLES USA Pro Cold Weather Valve and Water Pipe Heating Cable/Multi-use for rigid plastic or metal pipes, preventing RV hose freezing or down a gutter downspout (3 Feet)
Feature
- QUICK AND EASY INSTALL – No more confusing instructions! Set it up and forget it with confidence the first time around with our easy to understand BONUS eBook. Our heat for water pipes install effortlessly for constant water flowing down to -40° F (-40° C) without monitoring thanks to the built-in thermostat. Rest assured as the indicator light let’s you know your Phoenix cable is ready to take on the harshest seasons.
- SAVE THOUSANDS ON COSTLY REPAIRS – Don’t wait before it’s too late and get stuck paying thousands of dollars on unexpected repairs that could be avoided. Our high-grade cables are tough and durable enough for rigid plastic and metal pipes up to 2. 5” (58mm) in diameter. With our trace cables you’ll always stay prepared for the unexpected.
- SAVE MONEY ON ENERGY AND – 120 Volt, 7 watts/ft. and only use 5 amps or less of electricity making our cables for a low economical footprint. Saves you money by using less energy by powering the cable only when needed by automatically turning on below 28° F (3° C) and off above 85° F (7 ° C).
- SAFETY TESTED FOR ALL SEASONS – Compromise elsewhere when it comes to the safety of your home. Get peace of mind with our safety rated cables constructed with a continuous ground braid with a tough and durable polyurethane inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Approved for water filled plastic (including PEX) and metal pipes only.
- UL APPROVED, CSA CERTIFIED – Made of superior industrial grade heat shrinkage tube for connection, our cable is considered to be the safest per industry standards. Set up includes: cable, grounded plug, built-in automatic thermostat and easy to understand instructions. Our cables plug into a standard 150 VAC outlet.
Description
NO MORE FROZEN PIPES EVER AGAIN What so special about our water pipe cable? Our energy efficient cables save on costly repairs by keeping your pipes flowing – no matter how cold it gets by turning on and off automatically. No more complicated install instructions! You get our easy BONUS eBook to help with your one time simple and easy install for peace of mind all year long. OTHER KEY BENEFITS: WORRY-FREE AUTOMATIC THERMOSTAT Once installed – set it and forget it. The self monitoring cable turns on below 38 degrees F and off above 45 degrees F MULTI-USE FOR RIGID PLASTIC OR METAL PIPES Use on your RV water hose or down a gutter downspout; wherever you need flowing water, just install our Phoenix Heat Cable SAVES MONEY USING 70% LESS ENERGY Uses power only when needed and consumes less than 5 amps that saves you money #1 SAFETY: UL APPROVED / CSA CERTIFIED Our package includes cable, grounded LED plug that indicates that the cable is working, thermostat and an instruction manual for easy install THE FINE PRINT – 100% MONEY-BACK Our Phoenix pipe cable is made with high quality materials for lasting usage. We’re certain you’ll love our product or you’ll get your money back. Our cables MAKE THE PERFECT GIFT for anyone that loves the outdoors and uses RV’s so ORDER NOW! Simply click “ADD TO CART” at the top of this page to order yours today!
6. Easy Heat AHB-112 Cold Weather Valve and Pipe Heating Cable, 12-Feet
Feature
- Manufactured in china
- Easy to use
- Highly durable
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing
- Includes grounded plug, built in thermostat, and instructions
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket
- AHB units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe
- UL listed
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing
- Includes grounded plug, built in thermostat, and instructions
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket
- AHB units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe
- UL listed
Description
Easy Heat AHB-112 12′ Pipe Heating CableEasy Heat AHB-112 12′ Pipe Heating Cable Features: Tough PVC inner insulation Continuous ground braid Weather resistant PVC outer jacket Energy saving Thermostat is located between cold lead and heating cable 2′ 18/3 cold lead with grounded plug 84 watts 120 volts AC 12′ heated section
7. CURRENT TOOLS PVC Heating Blanket – Electrical Heating Blanket For PVC Conduit Bending with Secure Straps & Built-in Stiffeners – 441
Feature
- HIGH QUALITY HEATING BLANKET – This Current Tools heating blanket for PVC conduit provides easy, efficient heating of PVC for bending
- STIFFENERS – The built in stiffeners hold the blanket tightly against the conduit surface
- SECURE HOLD – The outer straps hold blanket in place while heating to ensure job security
- HIGH POWER – The heating blanket is 120 vac, 300 watts, and 2.5 amps
- MADE IN THE USA – Proudly designed and crafted in the US
Description
The Current Tools 441 PVC Heating Blanket is the fast and economical way to heat 1/2″ to 1 1/2″ PVC conduit for bending. The straps and built-in stiffeners hold the blanket tightly in place against conduit surfaces while heating. 120 vac and built in the USA.
8. Pentair 777445-000 Frostex Pipe Heating Cable – 100′ Spool
Feature
- Prevents above ground residential water pipes from freezing
- Uses a self-regulating conductive core that reacts to changes in temperature
- As the environment becomes colder, cable resistance decreases and more heat is generated
- As the environment warms, cable resistance increases and less heat is generated
- 100′ Frostex spool
Description
The Frostex pipe freeze protection system prevents above ground residential water pipes from freezing. The system includes a 3 watt per foot electric heat trace cable, 9800 FlexFit plug kit and 9610 application tape. The heat trace cable uses a self-regulating conductive core that reacts to changes in temperature. As the environment becomes colder, cable resistance decreases and more heat is generated. Conversely, as the environment warms, cable resistance increases and less heat is generated. The Frostex 9800 FlexFit plug kit is used to terminate the heating cable. The 9800 includes a specially designed ground-fault protected plug and an end seal for sealing the cable end that does not plug in, as well as a power indication signal light.
9. ICOOL Copper Aluminum Tubing Bender Kit Hand Tool 1/4 to 7/8 Inch with Tube Cutter for HVAC Refrigeration System Maintenance
Feature
- 【Suitable Size】7 exchangeable tube bender former: 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″,The formers are made of aluminum alloy.
- 【Kit Included】Tubing Bender x 1,Fixed Supports x 2,Tube Bender Heads x 7,Pipe Cutter x 1,Carrying Box x 1.
- 【Application】Trouble free ratchet mechanism, easy to hand bending soft copper and soft aluminum tube, widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems.
- 【Nice set】The package include a pipe cutter,tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm).
- 【Convenient】A hard plastic storage case keeps tools easy transportation and portability, instruction also provided for easy and professional use.
10. DEF Hook Wrench Castle Nut Tool for Floor Heating Pipes and Cars for Walnut Pistachios
Feature
- Material: Made Of High Carbon Steel With Oxidized Black On The Surface
- Fit: Standard Castle Nuts And Commercial Castle Nuts
- Rubber Grip: Improved Performance, Safety And Comfort
- Note: Not a multi-tool. Not an armored wrench,Fixed Buckle, Unable To Move
- Area: Suitable For All Commercial, Plumbing, Fittings, Cars With An Outer Diameter Of 1 1/4 Inches
Description
Material:
Made Of High Carbon Steel With Oxidized Black On The Surface
Fit:
Standard Castle Nuts And Commercial Castle Nuts
Rubber Grip:
Improved Performance, Safety And Comfort
Note:
Not a multi-tool. Not an armored wrench,Fixed Buckle, Unable To Move
Area:
Suitable For All Commercial, Plumbing, Fittings, Cars With An Outer Diameter Of 1 1/4 Inches
Toothed locking ring:
It has a place in the application of construction machinery to facilitate the precise operation of
special tools during tightening and loosening.
Like a hook wrench:
Apply pressure from one side and lose balance on the other side
to achieve the desired effect
Rubberized handle:
Protect your hands during use and prevent tools from slipping
Total Length:
7 inch,
thickness: 1/8 inch
Conclusion
By our suggestions above, we hope that you can found Heating Pipe Tool for you.Please don’t forget to share your experience by comment in this post. Thank you!
