The Best Heating Grate 8 12

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.

Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.

This solid stamped steel register vent grille will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. You can install this register supply grille on the ceiling or on the sidewall. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.

Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.

This solid stamped steel register vent grille will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. You can install this register supply grille on the ceiling or on the sidewall. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.

HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!

30″w X 10″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 11.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.

How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

12″w X 8″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Duct Cover Sidewall or Cieling – Grille Register – High Airflow – White
12″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.875″ Width X 10″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″ at the width, and + 2″ at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.

Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.

This solid stamped steel register vent grille will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. You can install this register supply grille on the ceiling or on the sidewall. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

12w” x 8h” opening (vent hole) dimension – actual size is approx 2″ wider.
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren?t readily apparent, but you?ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you?ll find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind.

Many homes require open heating ducts to transfer and moderate airflow. For older homes missing the cast iron Grilles and Registers or new construction with a traditional style, these pieces are made of the same materials as the originals. Choose the open Grille, for a constant flow, or the Register, which is backed with louvers that can be opened and closed. Both are made from cast iron and finished in Matte Black.

8″ X 12″ Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 9.75 Width X 13.75 Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers. HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!

High Standard

Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges – Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment Easy Unrestricted Air Flow For Your HVAC System

How To Measure A Grille

Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size + 1.75″ at width and + 1.75″ at height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.”

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.