869 reviews analysed
1. Supplying Demand WB27X11138 20 Amp 125 Volt 611 Glass Microwave Fuse Compatible With GE
Feature
- 1 1/4″ in total length
- Compatible with some GE brands. If after installed the fuse blows then most likely their is a short somewhere in your Microwave causing this. This fuse will not blow unless it goes above a 20 amp pull. If this happens then you need to find out where the short is before replacing fuses as they will constantly blow if the short is not fixed.
- Alternate part numbers include 1810711, AH3486694, EA3486694, PS3486694
- Comes in safe Supplying Demand packaging.
- Service Tip: Microwaves hold voltage even after they are unplugged. Be careful in making sure that all electricity has been disengaged in the microwave before doing a repair.
Description
This is a 20 amp glass microwave fuse. Usually can be located on the control board. This is not a GE OEM product. The GE brand names and logos are the registered trademarks of their respective owners. Any use of the GE brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”
2. Zephyr Fast Acting Glass Cartridge Fuse (Pack of 6) 6x30mm (20 Amp)
Description
Description:
Protect your investment with a Zephyr fast acting fuse. Many of today’s electronics and home appliances are protected by fuses in case of a power spike. UL/CSA 248-14 compliant design ensures a low breaking capacity, and thus offers immediate disconnect of power should the amperage exceed that of the fuse rating. Other inferior fast acting fuses may vary by as many as 1-2 amps, meaning your 8 amp fuse might not blow until power spikes to 10 amps. Don’t let a poorly made fuse be the cause of electrical damage to your investments.
Specifications:
Diameter: 6mm (1/4″)
Length: 30mm (1-1/4″)
Amp Rating: 20A
Voltage Rating: 250V
Body Material: Glass
Fuse Type: Fast Acting Blow (Fast Burn)
3. General Electric WB21X10148 Microwave Thermostat
Description
Product Description
This is a Genuine Replacement Part, The Model Number and Name for The Following Item: General Electric (GENF0) WB21X10148 Microwave Thermostat.
From the Manufacturer
This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WB21X10148 Microwave Thermostat
4. Microwave Fuse Ceramic Fuse Cartridge Fuse 20 Amp 250V Slow-Blow Compatible and Universal Replace for GE WB27X10388 and Whirlpool Kenmore Other Microwave 5 PCS
Feature
- Production Name:Microwave Fuse, Rated Current: 20 Amp, Rated Voltage: 250V,Size: 6×30 mm/0.24×1.2 in(Dia x Len)
- Key Charactor: Slow-Blow(Time-Delay) Ceramic Fuse,resist surge current,completely compatible replace for GE WB27X10388
- This fuse is widely used for general microwave as total power overload protect
- Ceramic fuse is filled with sands inside tube, not worry about glass broken and produce glass fragment like glass shell fuse when fuse burnt
- Also common and universal fuse for home appliance fuse using, 1 year warranty
Description
Microwave fuse 20 Amp 250V 6×30 mm/0.24×1.2 in(Dia x Len)
Key Remind:
1.shut down power before you replace
2.check your original size of fuse, mainly several parameters, body diameter, body len, rate current, rate voltage
Most Important Point
Question: Why does my microwave fuse offen burnt after I replace fuse not long?
Answer:Microwave fuse should use slow-blow type because its loading will increase much when microwave starts. It needs a little overload when machine starts(only a short time). So some people replace it with fast-acting fuse and cause burnt frequently. Using wrong type fuse.
Question:What type appliances are need slow-blow(time-delay)fuse?
Answer:Normally inductive appliance needs. This type device’s current loading will be much high when it starts, like surge current impact.Common microwave,motor, metal halide light. Yet resistant loading like electrical heating tube is not need.
5. Pack of 5-20 Amp Microwave Ceramic Slow Blow Fuse 250V Universal Replace for GE WB27X10388 and Whirlpool, Kenmore Other Microwave Ovens
Description
Pack of 5 pcs. 20A Slow-Blow (Time Delay) Ceramic Fuse. If you add 20 to cart, that will be a box (100 pcs.) Rated Voltage: 250v, 250 volts (also replaces 125v) Question: Why does my microwave fuse often burnt after I replace fuse not long? Answer: Microwave fuse should use a slow-blow type because its loading will increase much when the microwave starts. It needs a little overload when the equipment starts(only a short time).
6. Supplying Demand WB27X11094 Microwave Fuse Compatible with GE Fits 1556167, AH2370184
7. GE WB27X10388 Fuse Replacement
Description
Product Description
This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WB27X10388 Range/stove/oven Line Fuse
From the Manufacturer
This is a Genuine Replacement Part,The Model Number and Name for The Following Item:General Electric (GENF0) WB27X10388 Fuse – Replacement
8. (2 Pack) XPARTCO (20AG) Microwave Replacement Fuse WB27X11138, AP4980426, PS3486694, 261201200040 for GE, Hotpoint
Description
Microwave Replacement Fuse WB27X11138, AP4980426, PS3486694, 261201200040 for GE, Hotpoint
Conclusion
By our suggestions above, we hope that you can found Ge Wb27x11138 for you.Please don’t forget to share your experience by comment in this post. Thank you!
