580 reviews analysed
1. Dryer Vent Cleaner Kit Vacuum Hose Attachment Brush Lint Remover Power Washer and Dryer Vent Vacuum Hose
Feature
- [Remove LINT BUILD-UP] – Sealegend dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
- [More than 28” long] – Flexible and handy vacuum hose attachments over 28inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can’t move.
- [SUCTION CONTROL] – Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- [HELPS PREVENT FIRES] – Using Sealegend Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- [Package Contains] – 1* Sealegend dryer vent cleaner kit
2. BoxLegend Dryer Vent Cleaner Kit Dryer Vent Vacuum Attachment Lint Remover Power Washer
Feature
- 【REMOVES LINT BUILD-UP】: Dryer Vent Vacuum Hose Attachment removes years lint build-up deep within your dryer vent, so your appliance run more efficiently.
- 【OVER 28in LONG】: Handy vacuum hose attachment measures over 28in long to reach deep into difficult places
- Perfect for cleaning behind appliances you can’t move.
- 【SUCTION CONTROL】: Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- 【HELPS PREVENT FIRES】: Using Vacuum Hose Attachment regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- 【CUSTOMER SERVICE】: We will do our best to provide our customers with satisfactory products and services. If you have any questions, we will respond to you within 24 hours.
3. Dryer Cleaning Kit – Generic Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush. Fits vacuum hoses 1 1/4 inches or less -by Mountain Trades
Feature
- You will receive – one flexible 24 inch crevice tool cleaner and one long 28 inch brush
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. ** Important – your vacuum hose needs to have a diameter of 1.25 or less to fit)** Does not fit Dyson ** See Description below for info on Shark Vacuum Cleaners. (measure the Shark vacuum hose to make sure it is 1.25 inches or less)
- Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas like down in your lint trap.
- Both the hose attachment and the lint brush are flexible. If the weather is cold when you receive the crevice tool it may be a little stiff, as it warms to room temperature it will become flexible.
Description
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.
4. Xming Dryer Vent Cleaner Kit, Dry Vent Cleaning Kit, Vacuum Hose Attachment Brush Lint Remover Power Washer and Dryer Vent Vacuum Hose
Feature
- 【Remove LINT BUILD-UP]】dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
- 【More than 24” long】Flexible and handy vacuum hose attachments over 24inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can’t move.
- 【WIDE CLEANING】 After connecting the vacuum cleaner, it can not only clean the dryer, washing machine, but also clean the dust accumulated in the gaps of the keyboard, bookshelf, air conditioner and other items
- 【HELPS PREVENT FIRES】Using Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- 【Package Contains】 – 1* Dryer vent cleaner kit
5. PetOde Dryer Vent Cleaner Kit Dryer Vent Vacuum Attachment Lint Remover Power Washer and Dryer Vent Vacuum Hose
Feature
- 【REMOVES LINT BUILD-UP】: Dryer Vent Vacuum Hose Attachment removes years lint build-up deep within your dryer vent, so your appliance run more efficiently.
- 【OVER 28in LONG】: Handy vacuum hose attachment measures over 28in long to reach deep into difficult places
- Perfect for cleaning behind appliances you can’t move.
- 【SUCTION CONTROL】: Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- 【HELPS PREVENT FIRES】: Using Vacuum Hose Attachment regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- 【CUSTOMER SERVICE】: We will do our best to provide our customers with satisfactory products and services. If you have any questions, we will respond to you within 24 hours.
6. Flexible Crevice Tool & 35mm to 32mm Hose Adapter for 1 3/8” Vacuum 24.4inch Long
Feature
- Clean those hard-to-reach places like dryer vents, heating ducts, under furniture, along side the refrigerator, under kitchen appliances or heavy furniture
- It bends up to 180 degrees and provides a 24.4 inch reach
- 1-3/8”(35mm) to 1-1/4”(32mm) Hose Adapter, use 1-3/8-inch hose with 1-1/4inch attachments
- This kit fits both 32mm vacuum wand and 35mm vacuum wand.
- The kit is only for vacuums accepting 35mm or 32mm inner diameter attachents. Please measure and confirm your vacuum attachments inner diameter before purchasing.
Description
One of our most popular generic attachments, this 24.4″ long flexible crevice tool allows cleaning in the most hard to reach areas of your home. Tool fits any vacuum cleaner accepting 1 1/4″ inch attachment. The attachment only fits vacuums accepting 32mm or 35mm inner diameter attachments. Please measure and make sure the size of attachment that fits your vacuum. If the tool got clogged, please take off both ends of the tool, and squeeze or poke it out with a long stick.
7. Holikme 5 Pack Dryer Cleaning Kit General Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush and 2 Adapters
Feature
- ✔ 5 Pack Complete Dryer Lint and Dryer vent Cleaner kit. Packege Including : 29inch long flexible Dryer lint cleaning brush, 25inch flexible nozzle hose attachment, Round Dusting Brush Soft Horsehair Vacuum Attachment，1.25inch(32mm) to 1.38inch(35mm) Vacuum Adapter and Dy-s-on Vacuum Adapter
- ✔ Improve Dryer Efficiency: Improving cloth dryer working performance by using this brush to cleaning the trapped lint and dust in dryer gap and exhaust port.
- ✔ Reduce Potential Disasters:Preventing fire risks of your beautiful house by using this brush to clean the buildup lint in the cloth dryer vent pipe.
- ✔ * ✔ Universal Support（2 Adapters）: One Adapter is for general Vacuum which 1.25inch(32mm) and 1.38inch(35mm) vacuum hoses. Second is Dy-s-on adapter fit for DC44, DC48, DC52, DC58, V6, not fit for V7/V8/V10
- ✔ Satisfaction Guaranteed – Every Holikme Dryer vent cleaning Product is good working performance and quality guaranteed.
8. Dryer Vent Cleaner Kit 28 Inch Cleaner Lint Trap Flexible Refrigerator Coil Brush and Vacuum Hose Attachment Set for Vacuum Hoses 1 1/4 inches or Less (6 Pack)
Feature
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. Important – your vacuum hose needs to have a diameter of 1.25 or less to fit (if the size not ,you can use the adapter to change the 32mm to 35mm )
- Hose Attachment Is Flexible But Not Flimsy : Has better airflow than others and does not clog as easy as others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Improve Dryer Efficiency:Removing debris, lint, and trash from your lint trap and tubing can reduce the risk of fires, improve drying efficiency, and extend dryer life.
- You will receive :one flexible 24 inch crevice tool cleaner and one long 28 inch brush , one dusty brush and one dyson adapter. If you are not sure if it will fit your vacuum please ask a question and we will respond.
- Design & Quality: Sturdy thick nylon bristles mounted on a galvanized wound steel bendable wire shaft moves through narrow slots picking up the lint, with a non-slip Pure Wood handle to reach inaccessible places easily – Lint vacuum remover rubber tip prevents scratches.
Description
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator, Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap, If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. Please make sure that your vacuum hose has a diameter of 1 1/4 inches or less. some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool, This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit. Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work, Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure).
9. EZ SPARES 25-inch Flexible Vacuum Crevice Attachment Crevice Tool Crevice Brush Tool Kit for All 1-1/4" or 1-3/8"(32mm-35mm) Vacuum Hoses
Feature
- Made of High Quality material：25″ Long ,Flexible，fits all vacuums accepting 1 1/4″ (32mm) or 1-3/8″(32mm-35mm) inner diameter attachments.
- Crevice tool：Great for corner, heating ducts, under furniture, along side the refrigerator.
- Flexible bends up to 180 degrees: Don’t worry about trying to contort or bend to reach those spots.”Put the brush into hot water.Soak for a while,take out and drain off.The brush will get straight.”
- Easy to clean：If you want to wash, just rinse with water.
- The brush is TPR material.Good quality and long service life.
10. LANMU Flexible Crevice Tool Extension Attachment for Dyson V11 V10 V8 V7 Vacuum Cleaner with Quick Release Converter Adapter
Feature
- LANMU Crevice Extension Tool for Dyson Vacuum is made of High Quality material.Durable and Safe.
- Flexible bends up to 180 degrees: No more worry about trying to contort or bend to reach those spots.Great for corner, heating ducts, under furniture,along side the refrigerator.
- Detachable and washable:LANMU Crevice Extension Tool can be taken apart to wash,flexible bend design make it easily to be stored,have a long service life.
- Wide Compatibility:Perfect fits for Dyson V6 DC35 DC45 DC58 DC59 DC62 Vacuum Cleaners,also apply to Dyson V7 V8 V10 V11 Vacuum Cleaner with Convertor Adapter.
- Warranty:LANMU provides 180-day warranty and friendly after-sale service,makes sure the Risk-free shopping for you.
Conclusion
By our suggestions above, we hope that you can found Flexible Dryer Vent Vacuum Attachment for you.Please don’t forget to share your experience by comment in this post. Thank you!
