We spent many hours on research to finding digital temperature oven controller, reading product features, product specifications for this guide. For those of you who wish to the best digital temperature oven controller, you should not miss this article. digital temperature oven controller coming in a variety of types but also different price range. The following is the top 9 digital temperature oven controller by our suggestions
785 reviews analysed
1. QuliMetal BBQ Digital Thermostat Controller Board for Pit Boss Wood Oven Grills P7-340/700/1000 with LCD Display
Feature
- 【COMPATIBILITY】Fits PIT Boss Wood Oven P7-340/700/1000 Thermostat Controller Board W/LCD Display
- 【DIMENSIONS】22.5 x 7 cm (L x W).【PACKAGE】Included 1 x Thermostat Controller Board
- 【FEATURES】With Bright LCD display, shows exact cooking temperature. High temperature resistance and long service life. Very easy to install. Restore your grill to its original operating efficiency with this part
- 【CONTROL TEMPERATURES】High mode can be used for highest heat possible. It also has smoke mode and temperature modes from 200 ℉ to 475 ℉. Take full control of your wood oven with this Direct Igniter Digital Thermostat Control Board
- 【DUAL PROBES INTERFACE】Have dual meat probes interface so you can check the meat’s internal temperatures. Prevent to lose the heat, bring you a succulent grilling
Description
QuliMetal BBQ Digital Thermostat Controller Board for Pit Boss Wood Oven Grills P7-340/700/1000 with LCD Display
2. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
3. DigiQ DX3 BBQ Temperature Controller Green and Digital Meat Thermometer for Big Green Egg, Kamado Joe, Weber, and Ceramic Grills
Feature
- The DigiQ solves the problem of unstable temperature swings in cookers, which can result in tough, dried, or burnt meat
- High-tech digital temperature control device automatically tracks the internal temperature of food and controls your grill’s temperature like an oven
- Audible “food ready” alert beeps once food has reached the perfect temperature
- High precision, standard digital temperature probes – 1 6ft Food and 1 6ft Pit Probe Included
- Revolutionary Pit Viper Fan/Blower, 100-240 V AC Power, Universal Adaptor, and Control Mount Bracket Included
4. WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
Feature
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
Description
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
5. MYPIN® TA4-SNR+K Thermocouple SNR PID Dual Digital Display Temperature Controller Dual Type-K Thermocouple
6. Utheer Digital Thermostat Controller Board Kits Grill Replacement Parts for Pit Boss Wood Oven Grills P7-340 700 1000 with W/LCD Display
Feature
- NOTE ► Fits PIT Boss Wood Oven P7-340/700/1000 Thermostat Controller Board W/LCD Display
- DIMENSIONS ► 22.5 x 7 cm (L x W). Package included 1 x Thermostat Controller Board
- FEATURES ► With Bright LCD display, shows exact cooking temperature. High temperature resistance and long service life. Very easy to install. Restore your grill to its original operating efficiency with this part
- CONTROL TEMPERATURES ► High mode can be used for highest heat possible. It also has smoke mode and temperature modes from 200 ℉ to 475 ℉. Take full control of your wood oven with this Direct Igniter Digital Thermostat Control Board
- DUAL PROBES INTERFACE ► Have dual meat probes interface so you can check the meat’s internal temperatures. Prevent to lose the heat, bring you a succulent grilling
Description
Fits PIT Boss Wood Oven P7-340/700/1000 Thermostat Controller Board W/LCD Display
7. Inkbird °F and °C Display PID Stable Temperature Controller ITC-106VH (ITC-106VH + K + 40A SSR + Black Heat Sink)
Feature
- Equipped with dual LED display
- Offers display options of Centigrade and Fahrenheit
- Enabling more humanized temperature control
- High standard self-adjust function along with multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
- It’s suitable for most applications, Sous Vide, Smoker, Brewing etc.
Description
Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range: 85~110% Rated voltage
Power Consumption: Approx. 5VA(100~240VAC)
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC(<1000ºC);1ºC(≥1000ºC)
Period of Sampling: 0.5S
Temperature Compensation: 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10~55ºC(no icy or condensation), RH 35-85% Humidity
Storage Temperature: -25~65ºC(no icy or condensation)
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
40A SSR SOLID STATE RELAY for temperature controller
Specifications:
Load Voltage: 24-380VAC
Load Current: 40A
Input Voltage: DC 3-32V
Pacakge:
1x Inkbird ITC-106VH Controller
1 x 40A SSR
1x Mounting bracket
1 x K sensor
1xBlack Heat Sink
1x Manual
8. F/C PID Temperature Controller, AGPtEK Dual Display Digital Programmable Temperature Control TA4-SSR Solid State Relay With 2 Alarms
9. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Conclusion
By our suggestions above, we hope that you can found Digital Temperature Oven Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!