The Best Bradford White 80 Gal Heating Elements

Product Description

Camco 02263 3000 Watt 240 Volt Screw-In ElementCamco 02263 3000 Watt 240 Volt Screw-In Element, Features; Each screw-in element comes with one gasket; 3000 watt, 240 volt, 10″ minimum tank diameter, 150+ watts per square inch; Carded

From the Manufacturer

Camco’s 3000W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

Product description

Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack

From the Manufacturer

Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.

Product Description

9001954-045 Features: -Used with electric water heaters. -Finish: Black and brass. -Made in the USA. Application: -Electric water heater. Product Type: -Thermostat. Finish: -Black and brass. Country of Manufacture: -United States.

From the Manufacturer

Upper electric water heater thermostat for 2-element models

Camco’s 5500W 240V screw-in ripple type ultra low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Premium Ultra LWD Lime Life elements carry a limited 5 year warranty. Ultra LWD and special metal surface (high performance nickel-chromium stainless steel alloy) reduce chances of lime build-up. They resist dry firing and are ideal for problem water areas and locations with intermittent water supply. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

Product Description

9000507-045 Features: -Used with electric water heaters. -Finish: Black. -Made in the USA. Application: -Electric water heater. Product Type: -Thermostat. Finish: -Black. Country of Manufacture: -United States.

From the Manufacturer

Lower electric water heater thermostat for 2-element models

The Stiebel Eltron Tempra 36 Plus Tankless Water Heater features exclusive Advanced Flow Control™ German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 36 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 36 KW/27 KW; Min. recommended household electric service 300 A; Amperage draw: 150 A/132 A; Number and min. recommended size of circuit breakers: 3 x 50 A (DP); Number of runs and min. recommended wire size (copper): 3 x 8/2 AWG; Max. temperature rises: 92 F/92 F at 1.50 GPM, 92 F/82 F at 2.25 GPM, 82 F/61 F at 3.00 GPM, 55 F/41 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 19 lb/8.6 kg; Nominal water volume: 0.39 gal/1.5l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

Product Description

When compared to gas type thankless water heaters, Stiebel Eltron tempera 36 plus cost less and is less expensive to install, since it does not require venting parts.

From the Manufacturer

The Tempra® Plus is the most technologically advanced tankless water heater available on the market today. Advanced Flow Control is exclusive to the Tempra® Plus and ensures a constant temperature output no matter how great the hot water demand is. Advanced Flow Control technology works by automatically adjusting the flow of water to eliminate unpleasant temperature fluctuation. What that means to you is a consistently satisfying experience every time, all the time !

Product Description

Monterey Florel Brand Growth Regulator 16oz This growth regulator stops the mess. Prevents fruit formation on Apple, Buckeye, Carob, Crabapple, Elm, Flowering Pear, Horse chestnut, Maple, Oak, Olive, Sour Orange, Sweet Gum/Liquid amber, Sycamore, and many more. One application in the spring during full bloom. Control both leafy and dwarf mistletoe. Also used on greenhouse ornamentals. Active Ingredients: Ethephon

From the Manufacturer

Florel brand Growth Regulator is registered to reduce or eliminate undesirable fruit development on many ornamental trees and shrubs such as: apple, buckeye, carob, cottonwood, crabapple, elm, flowering pear, horse chestnut, maple, oak, olive, pine, sour orange, sweet gum (liquidambar) and sycamore. It also works on many other species that produce nuisance fruit. Application must be made prior to fruit set; apply at the mid to full-bloom stage in sufficient water to wet (do not spray to run off). Good spray coverage is essential for complete fruit elimination. Application made too early or too late will also not be effective. Apply at 1 quart per 10 gallons of water (3 oz./gallon). The amount of spray used will depend upon the size of the tree. Temperatures at the time of application should be between 65 degrees Fahrenheit and 95 degrees Fahrenheit for the best results. Do not apply to trees that are under stress from disease, high temperatures, drought, etc. In university tests, we have received 95-100 percent control of undesirable fruit on many species. However, timing is extremely critical! Florel brand Growth Regulator is the only product registered in the U.S. to control mistletoe. It can be used on ornamental deciduous trees to control leafy mistletoe and on conifers for dwarf mistletoe control. On deciduous trees, the ideal time to apply is in the spring just before leaf-out. Daytime temperatures must be above 65 degrees Fahrenheit for good results. Spray only the individual bunches of mistletoe, not the entire tree. Complete kill will not be achieved, but it should be about four years before you will have to retreat. On conifers for dwarf mistletoe, apply in early summer prior to seed dispersal.

Made in the USA the Elegance king mattress pad is a special edition construction of tightly quilted triple layer polyester filling. The triple layer creates an allergenic and dust mite barrier for an ideal sleep. Fully elastic bedskirt fits up to 21-inch deep mattresses. The mattress pad ships in a vinyl zippered bag for storage when not in use.