The Best Beam Vacuum Floor Tool
992 reviews analysed
1. Electrolux Central Vacuum Premium Bare Floor Brush
- *Fits ONLY Electrolux Quiet Clean, ELUX1600 and Beam Q powerhead that have square neck
- This floor brush comes with a square neck and is NOT compatible with the standard round neck hose and accessories
- *Sumo Floor Brush NOT compatible with Epic Series
- *Perfect for any hard surface you want to clean. Wand is not included but offered separately
- *Free Technical Support, contact 929.800.2980
2. Cen-Tec Systems 37737 12" Combination Hard Floor and Carpet Vacuum Nozzle
- The 12” 37737 is designed for silent movement on hard floor with a wrap around nylon brush and low noise wheel. The brush is retracted using and on the tool rocker switch and then is suitable for all carpeted surfaces. The 1 ¼” neck of the tool double pivots to follow you through the vacuuming motion keeping the face of the tool at the ideal angle to insure cleaning performance.
- The stainless base plate has deep channels to the tool edge to insure excellent edge cleaning and maximum air flow for capturing debris. Two lint strips in front of and behind an oversized channel capture lint and fibers from the carpets surface and help direct them into the air stream.
- The brush is supported with a stamped steel back plate to insure uniform support for the brush when on hard floor surfaces and protecting the base of the tool from damaging sensitive surfaces.
- The oversized pedal is easily operated with the foot to ease transitions from carpet to hard floor making the 37737 ideal for today’s home with a mix of floor surfaces.
- Compatible with all canister vacuums, central vacuums, and commercial back pack vacuums using 1.25” accessories
The 37737 is a premium nozzle for both hard floor and carpeted surfaces. The tool is virtually silent when moving across hard floor surfaces due to the oversized wheel located just under the double pivot neck. The neck pivots first at the tool and then at the neck base to insure maximum cleaning performance. The 37737 is compatible with all canister vacuums, commercial back pack vacuums using 1.25” accessories, and all major brands of central vacuum including Beam, Electrolux, Vacumaid, Cyclovac, MD, Vacuflo, Canavac, Nutone, Eureka, and Imperium. To confirm the 37737 consider the nozzle end of your wand or extension tube. If it has a connection without a button and measures approximately 1.1/4” on the outside surface, it should be compatible. The 37737 is not compatible with several brands of European vacuums like Miele which require a 1.375” neck.
3. Beam Air Turbine Central Vacuum Cleaner Turbo Brush Floor Brush Attachment Tool 045216
- Genuine Beam Product / OEM
- The Beam 045216 Turbo Brush is ideal for use on low pile carpets and area rugs
- This turbo brush is the perfect addition to non-electric wands and hoses
- The Beam 045216 turbo brush uses the central vacuums suction power to agitate the brush roller getting deep down dirt from carpets and throw rugs
- The Beam 045216 Turbo Brush is ideal for use on low pile carpets and area rugs.
- This turbo brush is the perfect addition to non-electric wands and hoses.
- The Beam 045216 turbo brush uses the central vacuums suction power to agitate the brush roller getting deep down dirt from carpets and throw rugs.
4. 10 Inch White Plastic Floor Brush With Horse Hair Bristles Tool Attachment Fits 1.25 Inch Vacuum Cleaner Wands
One FitAll White Plastic Floor Brush With Horse Hair Bristles, 10 Inch Wide Cleaning Path, Plastic 45 Degree Angle Swivel Elbow, and 1 1/4 Inch (1.25″) Diameter Connector End.
5. Cen-Tec Systems 93785 Premium Vacuum Attachment Kit with Telescoping Wand, Gray
- Designed to work with both conventional and electric hoses that have a button lock stub tube to engage the chrome telescopic wand included in the set. The wand features Cen-Tec’s exclusive button down feature that makes it easier to disengage the hose from the wand for above the floor cleaning and storage
- Includes a 12” pivoting neck natural fill floor brush in pearl gray. The brush is designed for use on all hard floor surfaces including hardwood, laminate, tile, stone, concrete, vinyl, and linoleum
- The soft bristles will not damage floors and effectively collect the dust and surface debris into the air stream through the window cut on the face of the nozzle where the vacuum pulls it away. Great for pet hair
- Also iincludes a 3” natural fill dusting brush with Cen-Tec’s exclusive square corner feature ideal for cleaning into square corners on table tops or shelves
- The 4” upholstery tool vented to insure airflow on soft surfaces. A slide on natural fill brush has a stiffer fill to help groom upholstery and lift off pet hair or fibers from the surface
- The 8” fluted crevice is ideal of corners, in the car, or on the stairs
- Telescoping ratchet wand allows the operator to fit the tools to their height, as well as extend the reach when vacuuming above the head or underneath furniture
- Compatible with major brands of central vacuums including Beam, Electrolux, Eureka, Honeywell, Vacumaid, Nutone, Canavac, Imperium, and Cyclovac. It is not recommended for use with Vacuflo, which has a unique shallow button and requires a different wand configuration
- All attachments included fit 1.25″ diameter vacuum connections
6. Nadair KIT-LV30S-OVO Central Vacuum Hardwood Floor Brush Cleaning Tools Attachment Kit – Tile Floors and Hard Surfaces – 30 ft. Switch Control Crushproof Hose
OVO attachment kit with universal 30ft switch control low-voltage crushproof hose and all purpose brushes and accessories: an adjustable metal wand, combo brush, deluxe storage accessory organizer, chrome hose hanger, dusting brush, upholstery brush and crevisse tool. Ideal for all types of hard surfaces.
7. 4-Piece Central Vacuum Accessory Set (Colors may vary)
8. Genuine Beam Rugmaster Plus Central Vacuum Tool Set 30′ Hose
The product sold by Anderson’s Appliances and More is Genuine throughout. Anderson’s Appliances and More is a Beam authorized dealer. It will also come in a Beam box.
9. Cen-Tec Systems 94775 CT20QD Quiet Drive Central Vacuum Nozzle with Integrated Wand, Black
- Suitable for use with all major brands of central vacuums, including: Beam, Electrolux, Eureka, VacuMaid, Vacu-flo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium with a flush mount hose
- Includes wand release, wrap around bumper, headlight, reset button and a height adjustment
- Quiet Drive poly-v belt is always in contact, which results in a dual brushed edge cleaning so no dirt escapes
- Can be used to replace a Nutone CT600
- Includes a soft molded bumper front and side bumper. A clear view window to confirm the agitator’s operation. Soft over molded wheels to run smoothly on carpet and quiet on hard floor surfaces
- Has a four position height adjustment allows the brush agitator to be set to carpet conditions for optimum cleaning
- A quick release neck permits the cleaning wand to drawn from the brush for above the floor cleaning
- The fully integrated telescopic electric wand connects the CT20QD to central vacuum and canister electric hoses with a flush plug position electrical connection.
10. 2KE0640600 Hoover Royal Gulper Floor Tool 32 Mm Vacuum Cleaner Attachment
made by weesell werks in germany
By our suggestions above, we hope that you can found Beam Vacuum Floor Tool for you.Please don’t forget to share your experience by comment in this post. Thank you!