Top 10 Automatic Pool Vacuum Mx8

Hayward’s Poolvergnuegen 2-Wheel Suction PoolCleaner uses your existing pool pump and filter for power—simply plug it into the designated suction port or the skimmer for quick an easy setup. Featuring patented self-adjusting turbine vanes, PoolCleaner delivers maximum power at any flow and allows passage of larger, more stubborn debris. Patented tire treads enhance climbing ability and obstacle maneuverability while patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles. Multiple pre-programmed internal steering sequences ensure complete pool coverage—PoolCleaner travels 8 to 10 feet before turning, and turns can range from 90 to 450 degrees. For average-sized pools up to 16’ x 32’, the 2-wheel Poolvergnuegen PoolCleaner is a powerful, efficient choice.

Equipped with patented SmartDrive technology, Hayward’s Navigator Pro Suction Cleaner systematically travels the floor, walls and coves of in-ground pools up to 20’ x 40’, creating thorough, reliable results—and with enhanced maneuverability, it keeps moving until the job is done. By connecting directly to your pool’s filtration system and installing in less than 10 minutes, Navigator Pro provides unwavering suction and simple setup. Plus, its wide vacuum inlet and unique wing design create a broad suction path that dirt and debris can’t escape. Navigator Pro also eliminates the need to empty debris bags, reducing overall maintenance and increasing relaxation time, while its advanced design cleans quietly and efficiently for a more peaceful backyard environment.

Instructions: Cleaner will not go into a shallow end that is less then 3ft deep.The hoses may not connect too tight so that the pool cleaner can move freely and reach more spots. Minor air leaking from the connection is normal. The cleaner won’t pick up leaves and articles.

Hayward’s Poolvergnuegen 4-Wheel Suction PoolCleaner uses your existing pool pump and filter for power—simply plug it into the designated suction port or the skimmer for quick an easy setup. Featuring patented self-adjusting turbine vanes, PoolCleaner delivers maximum power at any flow and allows passage of larger, more stubborn debris. Patented tire treads enhance climbing ability and obstacle maneuverability while patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles. Multiple pre-programmed internal steering sequences ensure complete pool coverage—PoolCleaner travels 11 to 14 feet before turning, and turns can range from 90 to 540 degrees. For larger pools or pools with deep ends up to 20’ x 40’, the 4-wheel Poolvergnuegen PoolCleaner is a powerful, efficient choice.

From the Manufacturer

The Zodiac Ranger Suction Side Automatic Above-Ground Pool Cleaner effectively cleans above-ground swimming pools including dished-out bottoms up to 72 inches! It features one moving part technology, which eliminates annoying hammer or flapper noise commonly associated with other pool cleaners. The unique Deflector Wheel helps prevent it from getting caught on steps, ladders and corners! The Ranger comes pre-assembled for easy installation and includes 32 feet of feed hose.
Intelligent Design
The cleaner body comes pre-assembled and will install in just minutes, best of all it requires no tools! Its extra-large Wheel Deflector helps the Ranger navigate your pool and avoid getting caught on steps, ladders or in corners so it can clean your pool uninterrupted. AG Disc – Allows the Ranger to glide effortlessly along the bottom of your pool, up the sides and around steps, cleaning your whole pool. The only single moving part is the diaphragm, which eliminates the need for gears, wheels, and flappers – which means simple operation and easy maintenance.
Maximum Efficiency
Additionally, the Flowkeeper Valve and Insta-Skim Compact self-adjusting flow control valve automatically regulates water flow, ensuring peak performance. The Ranger is built to work quickly, effectively, and quietly, automatically regulate water flow, ensuring peak performance.

Product description

The Baracuda G3 will thoroughly clean your inground pool floor and walls to automatically remove dirt, debris, bugs, twigs, leaves, sand and even pebbles. The G3 has only one operational moving part-the Long-Life Diaphragm. No gears, wheels, or flappers means simple operation, maximum power, and low-cost maintenance. It’s compact and self-adjusting flow control valve automatically regulates water flow, ensuring peak performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch.

From the Manufacturer

The Zodiac G3 In-Ground Suction Pool Cleaner is a quiet and powerful suction cleaner that works with low-speed pumps to clean with maximum efficiency. The G3 will devour small and medium-sized debris without trouble to ensure the floor, walls and steps of your entire pool receive a thorough cleaning.
Premium Efficiency
The Zodiac G3 is compatible with any single, two-speed or variable-speed pumps to clean more efficiently and with less flow. G3 suction cleaners work with a FlowKeeper Valve that automatically regulates water flow, to maintain peak cleaning performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch Intelligent Design
Navigating an in-ground pool is made easier by the Wheel Deflector which helps with movement around tight corners. Equipped with scuff-resistant Long-Life Hoses, the G3 is a rugged pool cleaner that is eliminates scuffs on all pool surfaces. The 36-Fin Disc is cleverly designed to increase adhesion to the pool surface and avoid getting hung-up on lights, drains covers, fittings and other pool features.
The G3 has a durable Long-Life Diaphragm with reliable, one-moving-part-technology that eliminates the need for wheels, flappers or gears to provide silent operation and low-cost maintenance. The patented Quick-Release Cassette provides easy access to the diaphragm for simplified routine maintenance.
Convenient Installation
The G3 suction cleaner works in all in-ground pools and can be installed in two simple steps:
1. Attach the disc, wheel deflector and hose
2. Connect to the skimmer or dedicated suction line
* No tools or special plumbing required *

Ponwec pool cleaner track is designed to use with Barracuda suction side in ground pool cleaner modelMX6/ MX8,Approved by a professional mechanic and made of high quality rubber,Make the service life of the Zodiac MX6 and MX8 longer
It is easy to install, saves time and effort, and can save you a large amount of maintenance costs.
Color:Black.

Quantity:2 Pack.

Outer diameter 6 inches and inner diameter 5.5 inches

Any question please contact us and we promise to work hard to help you to solve this problem. 

Hayward’s SharkVac XL Robotic Pool Cleaner delivers a complete clean by scouring the floor, walls, coves and waterline in just three hours. It runs separately from the pool’s filtration system, reducing filter backwash frequency to save both time and money. Out-of-water and beach-entry sensors prevent the cleaner from leaving the water while cleaning the waterline, and high-performance steering capabilities optimize cleaning paths for fast, complete results. Built with high-quality components and advanced technology for maximum energy efficiency plus incredible ease of operation—no hoses, hookups or extra pumps required—SharkVac XL is a powerful way to eliminate dirt and debris in any in-ground pool.