The Best Whirlpool W10503278

Edgewater Parts W10503278 Control Board Brand New vCompatible With Whirlpool Refrigerator

Product description This part works with the following brands Whirlpool, Kenmore, Amana, Maytag, KitchenAid, Jenn-Air, Inglis. Replaces following part # AP6022400 replaces 12002339, 12002445, 12002449, 12002508, 12002509, 12002567, 12002706, 12784415, 12784415V, 12868502, 12868510, 12868513, 67003867, 67004453, 67004496, 67004907, 67005043, 67005280, 67005281, 67006034, 67006209, 67006214, 67006216, 67006226, 67006712, 67006740, 8208187, PS11755733, W10165748, W10503278.Ask our technician abour compatibility if you are not sure. Product details Part number: WPW10503278 Item weight: 6.4 ounces Product dimension: 5.7 x 4.8 x 4.4 inches
NOTE:THE COLOR OF THIS Refrigerator Control Jazz Board MAY BE “BLUE” OR “GREEN”.

This electronic control board (part number WPW10503278) is for refrigerators.

Electronic control board WPW10503278 manages the functions of the refrigerator such as cooling and defrost times.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Compatible brands:Kenmore whirlpool maytag amana kitchenaid kenmore elite ikea inglis etc

Replaces part:WPW10503278 W10503278 W10165748 12002339, 12002445, 12002449, 12002508, 12002509, 12002567, 12002706, 12784415, 12784415V, 12868502, 12868510, 12868513, 67003867, 67004453, 67004496, 67004907, 67005043, 67005280, 67005281, 67006034, 67006209, 67006214, 67006216, 67006226, 67006712, 67006740, 8208187, PS11755733,

For your better and faster installation, you could search W10503278 on YouTube to get the installation video.The following are the reference.

 {STEPS}

First step: First, unplug the refrigerator before operation. Wear work gloves,Then remove the light cover by sliding it towards the back of the refrigerator.

Second step: Depress the two tabs through the two slots on the back side of the light housing with a flat head screw driver. This will allow the board housing to flip down. Then remove the two wire connectors to the board.

Third step: Then Depress the two tabs that lock in the two separate sections of the control board. Remove the old control board, and reinstall the new control board.

Last step:The new control board comes as one piece, and you will have to snap the board at the break line to separate the new control board into two pieces before installing. Once this is done, you can re-install everything in the reverse order.

With the new WPW10503278 Jazz Control Board installed, you will need to program the control board to work with your refrigerator.

We provide you with high quality after-sales service. I

Description ：

Package include:

1 x Fridge Control Board

1 x Instruction Manual

This Part Fixes The Following Symptoms:

• Fridge too warm.
• Freezer not defrosting.
• Will Not Start.
• Freezer section too warm.
• Freezer too cold.
• Fridge runs too long.
• Fridge too cold.

Programming Procedure :

The replacement control board is not programmed The Refrigerator will not operate without a code selected. It is important to program the control board with the correct code. Product must be powered up to program. If no code has been programmed the display will display 00 or flashing 00.

Note: The program code for this refrigerator is located on the serial plate on this unit after the word Code.

1. Open the fresh food door and hold the fresh food door light switch closed while pushing the freezer temperature down key pad 3 times consecutively.

2. Release the Fresh Food door light switch.

3. The control will display PE to confirm entry into the programming mode.

4. Entry is confirmed by pressing the Freezer Down key once more.

5. The control will display no Program Code.

6. To set the desired Program Code number, press the Freezer and Refrigerator UP keys. The corresponding digit will be advanced with each key press.

7. Once the desired Program Code is displayed, press the Freezer DOWN Key until the Program Code begins flashing indicating it has been saved.

Note: If you attempt to enter an invalid Program Code the control will not save the code, but will flash Program Code 00, (The unit will NOT run with a Program Code of 00).

8. Once the Program Code has been saved the Programming Mode is exited by closing the Refrigerator door(s).

Note:If you to enter a wrong Program Code the control can be reprogrammed by restarting the procedure from the beginning.

Replacement guide:

Step1: First, unplug the refrigerator before operation. Then remove the light cover by sliding it towards the back of the refrigerator.

Step2: Depress the two tabs through the two slots on the back side of the light housing with a flat head screw driver. This will allow the board housing to flip down. Then remove the two wire connectors to the board.

Step3: Depress the two tabs that lock in the two separate sections of the control board. Remove the old control board, and reinstall the new control board.

Programming Procedure :

If no code has been programmed the display will display 00 or flashing 00.

Note: The program code for this refrigerator is located on the serial plate on this unit after the word Code.

1. Open the fresh food door and hold the fresh food door light switch closed while pushing the freezer temperature down key pad 3 times consecutively.

2. Release the Fresh Food door light switch.

3. The control will display PE to confirm entry into the programming mode.

4. Entry is confirmed by pressing the Freezer Down key once more.

5. The control will display no Program Code.

6. To set the desired Program Code number, press the Freezer and Refrigerator UP keys. The corresponding digit will be advanced with each key press.

7. Once the desired Program Code is displayed, press the Freezer DOWN Key until the Program Code begins flashing indicating it has been saved.

Note: If you attempt to enter an invalid Program Code the control will not save the code, but will flash Program Code 00, (The unit will NOT run with a Program Code of 00).

8. Once the Program Code has been saved the Programming Mode is exited by closing the Refrigerator door(s).

Note:If you to enter a wrong Program Code the control can be reprogrammed by restarting the procedure from the beginning.

Replacement Thermistor Kit

Product description This part works with the following brands Whirlpool, Kenmore, Amana, Maytag, KitchenAid, Jenn-Air, Inglis. Ask our technician abour compatibility if you are not sure. Product details Part number: WPW10503278 Item weight: 6.4 ounces Product dimension: 5.7 x 4.8 x 4.4 inches

2-Pack UpStart Components Replacement W10503278 Refrigerator Control Jazz Board for Whirlpool GX5FHDXVY00 Refrigerator

Please note: This is an UpStart Components Brand replacement part, NOT an OEM product. All mentions of brand names or model descriptions are made strictly to illustrate compatibility. All brand names and logos are registered trademarks of their respective owners. This product is not affiliated with any brands and is not covered under any warranties offered by the original manufacturers. Any warranties for this product are offered solely by UpStart Components.

UpStart Components Replacement W10503278 Refrigerator Control Jazz Board for Whirlpool EB9SHKXVQ03 Refrigerator

Please note: This is an UpStart Components Brand replacement part, NOT an OEM product. All mentions of brand names or model descriptions are made strictly to illustrate compatibility. All brand names and logos are registered trademarks of their respective owners. This product is not affiliated with any brands and is not covered under any warranties offered by the original manufacturers. Any warranties for this product are offered solely by UpStart Components.