Top 10 Vacuum Pickup Pen

Specification:
Material: Meta, Rubber
Total Length: 160mm
Suction cup sizes: 10mm/7mm/3mm

Package Content:
2 x Vacuum Sucking Pen
6 x Suction Header

Usage:
1. Install a proper IC suction header on suction pencil.
2. Place the suction header lever on IC.
3. Press down the button on the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
4. Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.

Notice:
It is recommended to humidify or lubricate before, just click on the water or click on the lubricant to have a suction effect on the smooth surface, and it is not able to absorb the rough surface.

1Practical pickup tool for IC and SMD. It has high quality material and perfect design.

Features:
Perfect suction pen for picking up small electronic components.
2 suction tips: a straight tip, a curved tip.
6 suckers in different sizes: 3mm, 7mm, 10mm.
One button to operate, easy to use.

Specifications:
Material: Metal + Plastic
Color: Black
Pen Length: 13cm
Item Weight(total): 20g / 0.7oz
Package Size: 21.5 * 6.5 * 2cm / 8.46 * 2.56 * 0.79in
Package Weight: 42g / 1.49oz

Package List:
1 * Suction Pen
2 * Suction Tips
6 * Suckers

A machine for two simultaneous operation and single patch speed in 2 seconds 1PCS range.The unique static noise design makes the machine work quietly. (Such as BGA, QPF and other large IC can be used to operate the suction cup, with your fingers to block the use of a large number of components, such as BGA, QPF and other large ICs can be used to hold the SMD components. There is a hole in the pen suck, put the finger after the release of the release).We put the machine’s suction range strictly control the viscosity of the solder paste, the machine’s suction size adjustable knob, so do not worry SMD components sucked up to the solder paste printed on the paste after the phenomenon was sucked back.

Specification

Suction can be adjusted

Every unit comes with two pens. Both of them can be used at the same time for two workers to share on the assemble line. One can be a unplugged for back up.

Vacuum pressure adjustable

Easy operation. Block the hole with a finger on the pen to pick up a component, open the hole to release the component.

Voltage: 110V

Suction range: 0-12000pa

Tube length: 80cm

Chuck length: 120mm

Power cable length: 87cm

Size: 175*90*78mm

Weight: 1.5Kg

Package Included

1 x Pump Vacuum Suction Pen Placement Machine

2 x Vacuum Suction Pen

2 x Tube

3 x Needles (1.6mm)

2 x Sucker (3mm,10mm)

Features:
– Material: Meta, Plastic
– Install a proper IC suction header on suction pencil
– Place the suction header lever on IC
– Press down the button on the suction pencil to let out the air within the vacuum unit
– Then release the button to produce vacuum suction force to pick up IC
– Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header

Package List:
2 x Vacuum Sucking Pen
6 x Suction Header

Features:

Using the vacuum principle, perfect suction pen for picking up small electronic components. Compact appearance and lightweight, easy to carry Practical pickup tool for IC, SMD and other parts, up to about 50g The pen body is made of high quality material, beautiful and durable This vacuum suction pen kit contains 2 suction tips and 6 suckers One button to operate, easy to use.

Specification:

Model: L611938

Material: Metal + Plastic
Color: Black
Sucker diameter: 3mm, 7mm,10mm (2pcs/each size)

Suction pen length:13.2cm/5.2in

Suction pen diameter:1.2cm/0.5in

Weight: Approx.42g/1.5oz

Package List:
1 * Suction Pen
2 * Suction Tips
6 * Suckers

1 * Holder

Description:
3 suction headers are provided with this handy suction pencil: large size for 40g, medium size for 18g, small size for 3g.
Specification:
Product Name: Vacuum Pen with Header
Color: White
Weight: 51g
Material: Plastic, Metal
Pen Size: 15 x 1.2cm / 5.9 x 0.5 inch (L*D)
Package Content:
2 x Vacuum Pen with 1 Bending Needle
6 x Suction Cups
How to Install:
a. Install a proper IC suction header on this suction pencil.
b. Place the suction header lever on IC.
c. Press down the button on the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
d. Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.

Description:
A machine for two simultaneous operation and single patch speed in the 2 seconds 1PCS range, the unique static noise design makes the machine work quietly. (Such as BGA, QPF and other large IC can be used to operate the suction cup, with your fingers to block the use of a large number of components, such as BGA, QPF and other large ICs can be used to hold the SMD components. There is a hole in the pen suck, put the finger after the release of the release), because we put the machine’s suction range strictly control the viscosity of the solder paste, the machine’s suction size adjustable knob, so do not worry SMD components sucked up to the solder paste printed on the paste after the phenomenon was sucked back.

Package Included:
1 x Pump Vacuum Suction Pen Placement Machine
2 x Vacuum Suction Pen
2 x Needles (1.6mm)
2 x Sucker （0.3mm,10mm）

Specification: Material: Meta, Rubber Total Length: 160mm Suction cup sizes: 10mm/7mm/3mm Package Content: 1 x Vacuum Sucking Pen 3 x Suction Header 1 x PLCC IC Extractor 1 x Chip Spring Assisted Usage: 1. Install a proper IC suction header on suction pencil. 2. Place the suction header lever on IC. 3. Press down the button on the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC. 4. Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.