599 reviews analysed
1. Automated Vacuum Switch
Feature
- 2640 TOTAL WATTS two input power cords permit operation from two separately protected circuits.
- TURN ON DELAY avoids the two power surges occurring at the same time.
- TURN OFF DELAY ensures that your work area continues to be cleared of remaining airborne debris.
- Modes of operation: Auto, Off and On. Dust Collector / Shop Vacuum up to 1HP or 5 Peak HP.
- NO VENTING HOLES the iVac’s internal components are designed to generate very little heat.
2. Automatic Vacuum Switch with Extra Outlet for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On/Off to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping
Feature
- Unique Current Sensing Technology. If the tool motor connected to the ‘A’ port exceeds 30W, the vacuum connected to the ‘B’ port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time
- Make the work more effective. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems
- Suitable for most medium duty workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
- Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch’s shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work
- Two Installation Methods. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong
3. Superior (K058) Universal Adjustable Vacuum Switch Kit
Description
Universal Adjustable Vacuum Switch Kit. For use with GM 3L30, 4L30E, TH180, TH180C. OE Reference # K058 . Superior Vacuum Switch Kit.
4. i-Socket Workshop Automated Vacuum Switch – Power Tool Activated Sensor and Automatic Shutoff – Workshop Safety Device – For Contractors and Woodworkers
Feature
- ESSENTIAL: Auto on off & means less dust! i-Socket supports OSHA compliance, a safety and convenience must-have in the workshop or indoor jobsite.
- EFFICIENT: Saves time, minimizes hazardous airborne dust, reduces cleanup and noise so you can focus on your work.
- INTUITIVE: Using i-Socket is an easy 3 step process. With Workshop you just plug-in and get to work.
- NEW UPDATED DESIGN: i-Socket Workshop features two accessory outlets, a durable enclosed casing, Mode switch and LED safety indicators.
- FLEXIBILITY The Mode switch allows the Workshop to function in Auto and Manual Mode for when you want to control use of the vacuum and accessory.
Description
i-socket Workshop Automatic Dust Control Switch
Tired of safety feeling like a waste of time-I Want an easier, more efficient way to manage your shop that will protect you against harmful airborne debris?
Then look no further than the i-socket Workshop Automatic Dust Control Switch! Over 10 years of proven reliability, i-Socket by DGC Products is the gold-standard in workshop safety devices. The new Workshop i-Socket is an updated, improved design allowing you more flexibility and control than ever before.
Workshop Automatic Dust Control Switch Features & Benefits:
Technical Specs:
About DGC Products
. DGC launched the original i-Socket Autoswitch in 2006. Today, products based on i-Socket Technology can be found at a number of large retail hardware chains, woodworking and lumber supply chains throughout North America.
5. Superior K058 Vacuum Switch Kit TH200-4R
6. DEWENWILS ODT12B Outdoor Light Sensor Timer, Heavy Duty Waterproof Plug in Switch, 100′ Range Remote Control for 2 Grounded Electrical Outlets 15Amp,UL Listed
Feature
- Light sensor & countdown timer: control your outdoor devices according to the schedule you set – on, off, dusk to dawn, on at dusk and off after 2, 4, 6 or 8 hours
- repeat schedule daily
- Remote control: turn on and off outdoor christmas/holiday/yard lights, lamps, pool pump, fountain from your room with the wireless remote, no need to go out in bad weather
- 100Ft rf range: strong rf signal can work through walls and doors to control outdoor lights and other electrical appliances as far as 100Ft in line of sight, which is suitable for persons with limited mobility, the elderly
- Heavy duty & durable design: ul listed, waterproof construction, ideal for outdoor and indoor use
- pbt material, 6-inch sjtw 14-3 grounded cord and max 15 amp ratings can satisfy most electrical appliances
- Easy to use: no programming and tools required, 12V 23A battery is included, just plug it in
- 2 grounded outlets run 2 devices at the same time, save you energy costs and operating time
Description
Great outdoor light timer
dewenwils outdoor timer has multi functions: dusk to Dawn, on at dusk and off after 2, 4, 6 or 8 hours. Once you set, it will repeat daily. You can also use the timer without dusk-dawn feature, just manually turn on/off by remote control or select button.
remote control
the outdoor timer is quite suitable for persons with limited mobility, The elderly. They do not need to go out in bad weather to turn on/off your outdoor lights. Strong RF signal Can work through walls and doors up to 100Ft. You can also use the select button to set directly if convenient.
paired in advance
the transmitter and receiver have been paired in advance. You can not reprogram it. There are several different codes(labeled a, b, C, D etc.). The frequencies shipped to you will be random if you purchase multiple units. If it affects your use, Please contact us, We will solve for you.
2 grounded outlets
dual 3-prong outlets can be used for outdoor pool pumps/fountains/lights. You can plug Two appliances into the timer at a time.
specifications
input voltage: 125Vac, 60hz
max power rating: 1875W resistive/1000W Tungsten/1/2hp
remote battery: 12V, 23a
cord: SJTW 14/3c
packing list
1xtimer
1xremote control (battery included)
1xinstruction
notes:
1. In case of power failure, the timer will go back to the off state and need to be reset to the desired operating mode Once power is restored.
2. In order to avoid the water into the outlets, The timer should be mounted in a vertical position with the outlets facing downward and at least 2Ft above the ground level. If you can make sure the water does not enter the outlets or use it indoor, please ignore the request.
3. Make sure the transmitter is placed far from light to avoid interference.
7. QTEATAK 20Pcs Black Rocker Switch, Mini Boat Switch ON-Off 2PIN SPST ON-Off-ON 3 Pin SPDT 10A/125V, 6A/250V Press Button Snap Rocker Switch for Car Auto Boat and Household Appliances
Feature
- 1.【Easy Installation Auto】Equipped with buckle, easy to install in all kinds of electrical engineering, as long as you have a 13mm*19mm hole.
- 2.【10000 Times ON-OFF Operating Life】Made of high quality polyamide eP(Nylon PA66) , this sturdy mini boat rocker switch is born for anti-corrosion,anti-acid and high resistant with silver terminals.
- 3.【Two Common Type】10Pcs SPST, ON-OFF, 2 Pins；10Pcs SPST ON-OFF-ON 3 Pins.
- 4.【Voltage】AC 125-250V
- Current: 6-10A.
- 5.【Rocker Switch Siz】Size(Each One): 21 x 15 x 25mm/ 0.8″ x 0.6″ x 1.1″(L*W*T) Mounting Size: 18 x 12 mm/ 0.7″ x 0.5″ (L*W*T)
Description
We fully understand your urging demand for solving your problem.
QTEATAK has established for 14 years.
As a responsible company, we put production quality in the priority list and commit to perfect every detail.
We choose materials of the best quality and obey technical standards including ISO9001:2008/CE/SGS/Rohs strictly.
We try to make that each product for you is the best.
Features
Mainly used in water dispenser, treadmill, speaker, battery car, motorcycle, TV, coffee pot, row plug, massage machine, etc.
SPST on-off control and 2 terminals
SPST on-off-on control and 3 terminals.
Color: Black
Material: Plastic+Copper
Performance parameters
Electrical Ratings 10A @ 125VAC；6A @ 250VAC
Electrical Life 10,000 cycles typical
Contact Resistance < 50 mΩ initial
Dielectric Strength 1500Vrms min
Insulation Resistance > 100MΩ min
Operating Temperature -25°C to 85°C
Storage Temperature -25°C to 85°C
Package Include
10 × AC 6A/250V 10A/125V 2 Pin On-Off Switches
10 × AC 6A/250V 10A/125V 3 Pin On-Off-On Switches
8. i-Socket Autoswitch Plus by DGC Products
Feature
- ESSENTIAL: Auto shutoff & less dust! i-Socket supports OSHA compliance, a safety and convenience must-have in the workshop.
- EFFICIENT: Saves time, minimizes hazardous airborne dust, and reduces clean up so you can work.
- INTUITIVE: Using i-socket is an easy 3 step process. With the Plus, just plug-in and get to work.
- REDESIGNED: i-Socket Plus features new components and lower actuation threshold. to support a wider range of tools from large chop and miters saws to handheld cutting devices.
- TRUSTED: 10+ years of reliability, i-Socket Plus is the affordable, gold-standard in shop safety technology.
9. 5Pcs On/Off Boat Rocker Switch 5Pcs 2 Pin Position Snap 12V 110V 250V QTEATAK
Feature
- 1.【Easy Installation Auto】Equipped with buckle, easy to install in all kinds of electrical engineering, as long as you have a 13mm*19mm hole.
- 2.【10000 Times ON-OFF Operating Life】Made of high quality polyamide eP(Nylon PA66) , this sturdy mini boat rocker switch is born for anti-corrosion,anti-acid and high resistant with silver terminals.
- 3.【Common Type】5Pcs SPST, ON-OFF, 2 Pins；
- 4.【Voltage】AC 125-250V
- Current: 6-10A.
- 5.【Rocker Switch Siz】Size(Each One): 21 x 15 x 25mm/ 0.8″ x 0.6″ x 1.1″(L*W*T) Mounting Size: 18 x 12 mm/ 0.7″ x 0.5″ (L*W*T)
Description
We fully understand your urging demand for solving your problem.
QTEATAK has established for 14 years.
As a responsible company, we put production quality in the priority list and commit to perfect every detail.
We choose materials of the best quality and obey technical standards including ISO9001:2008/CE/SGS/Rohs strictly.
We try to make that each product for you is the best. We provide 12 months warranty service for all of the products
Features
Mainly used in water dispenser, treadmill, speaker, battery car, motorcycle, TV, coffee pot, row plug, massage machine, etc.
SPST on-off control and 2 terminals
SPST on-off-on control and 3 terminals.
Color: Black
Material: Plastic+Copper
Performance parameters
Electrical Ratings 10A @ 125VAC；6A @ 250VAC
Electrical Life 10,000 cycles typical
Contact Resistance < 50 mΩ initial
Dielectric Strength 1500Vrms min
Insulation Resistance > 100MΩ min
Operating Temperature -25°C to 85°C
Storage Temperature -25°C to 85°C
Package Include
5 × AC 6A/250V 10A/125V 2 Pin On-Off Switches
10. Taiss 1Pcs LJ18A3-8-Z/BX-5V M18 8mm Sensing DC 5V NPN NO（Normally Open） 3D Printer Cylinder inductive Proximity Sensor Switch Work Voltage 5VDC Special for MCU
Feature
- Product Name : Inductive Proximity Switch
- Model : LJ18A3-8-Z/BX 5V
- Wire Type : DC 3 Wire Type Brown, black, Blue)
- Switch Appearance Type : Cylinder Type
- Theory : Inductive Sensor
- Output Type: NPN NO(Normal Open)
- Diameter of Head : 18mm
- Detecting Distance : 8mm
- Supply Voltage : DC5V
- Current Output : 300mA
- Detect Object : Iron
- Operating Temperature : -25C to +55C (Non-freezing Condition)
- Size : 7 x 3cm/2.8” x 1.2” (L*Max. Dia)
- Cable Length : 103cm / 40.55″
- External Material : Plastic, Alloy
- Net Weight : 80g
- Package Content : 1 x Inductive Proximity Switch Special note: if the product you received is damaged or does not work properly, please contact us by email in time, and we will replace the new product for you free of charge
Description
Features : 100% Brand New Voltage: DC 5V Output current: 300mA 3 Wire Polarity: NPN Detection Distance: 8 mm Ouput Status: Normally Open Part number: LJ18A3-8-Z/BX Detection objects: Conductor Package Includes: 10PCS M18 8mm sensing DC 5V NPN NO LJ18A3-8-Z/BX-5V cylinder inductive proximity sensor switch work voltage 5VDC special for MCU
Conclusion
By our suggestions above, we hope that you can found Vacuum Sensing Electric Switch for you.Please don’t forget to share your experience by comment in this post. Thank you!
