The Best Dishwasher Tine Row Pivot Clip Wpw10082853

Fit Models: (Please Compare The Part Number With Your Original One Before Purchasing!)

This manufacturer-approved adjuster assembly is for use on the upper dish rack. This adjuster assembly can be used for either the left or right hand side. The adjuster assembly lets you change the height of the dishwasher’s upper rack.

Replaces the following parts :

W10546503, W10418314, W10306646, AP6022813, PS11756150, WPW10546503, WPW10546503VP, B008DJLRKW, B017TLV632, etc..

Compatible brands and models include but are not limited to:

Whirlpool: BLB14DRANA5, KDTE204DSS0, BLB14DRANA1, BLB14DRANA2, BLB14FRANA0, GLB14BBANA1, BLB14DRANA4, GLB14BBANA0
KDFE104DBL0, KDFE104DBL1, KDFE104DBL2, KDFE104DBL3, KDFE104DBL5, KDFE104DSS0, KDFE104DSS1, KDFE104DSS2, KDFE104DSS3, KDFE104DSS4, KDFE104DSS5, KDFE104DWH0, KDFE104DWH1, KDFE104DWH2, KDFE104DWH3 etc.;
Jenn-Air: JDB8200AWP2, JDB8200AWP3, JDB8200AWS2, JDB8200AWS4, JDB8500AWF2, JDB8500AWX2, JDB8500AWX3, JDB8500AWY2, JDB8500AWY3, JDB8700AWP2, JDB8700AWP3, JDB8700AWS2 etc.
Admiral, Amana, Estate, Harwick, Kenmore, Norge, Roper

Fixes the Dishwasher following symptoms:

Not washing properly;
Dishrack will not pull out;
Dishrack will not push in;
Dishrack is not level.

Specifications:

Material: Plastic;
Color: Black;
Upper Arm: 9.8” x 3”;
Base Width: 2.5”;
Quantity: 2 Pcs.

Warm note:

This is not original product the mention of any related model designation above is only for purposes of demonstrating compatibility.

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Part Numbers: 8269117, WP8269117, AP6012288, 8269167, 8269168, 8269169, 8270115, PS11745495, B008DK7I0Y, B0050O1KVE, B001IDJLLW, B001EY4HH8, B002YOE1YQ, B00Y1HA4B8

Replacement Door Latch Handle for Whirlpool Dishwasher