791 reviews analysed
1. SUNGATOR 12-Pack Hose Barb Fittings, 3/8" Barb x 3/8" NPT Male Pipe Brass Fittings, Hose Adapter
Feature
- 【DURABLE】: High grade brass construction for corrosion resistance, high temperature ductility and low magnetic permeability, 3/8”barb X 3/8”NPT male pipe, 12 pack
- 【FIRM】: High strength, high hardness premium solid brass of a longer service life with thick wall, more durable than iron and iron galvanized pipe fittings, not a cast product
- 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection
- 【FUNCTION】: This pipe fitting can apply to water, gas, oil and fuel especially for hoses
- 【TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F)
Description
SUNGATOR is committed to bringing cost-effective products to customers, so that customers get more than they pay, high quality products to our own requirements, customer satisfaction is our pursuit!
Firm: Heavy duty solid brass has strong corrosion resistance, thicker wall extends the service time, and brass pipe fittings are durable than iron and iron galvanized pipe fittings.
Great fixation: Deeper and smoother threads allow better bite, enhancing fixation, not easy to slip.
Tips: For better sealing, we suggest that all fittings must be used with teflon tape.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Contents: 12 pack of 3/8”barb X 3/8”NPT male pipe.
2. 1/8” NPT Male to 1/4” (6.35MM) Barb 90 Degree Hose Fitting Aluminum 1/8 inch NPT Thread to AN4 Hose Barb Fuel Line Adapter Black
Feature
- Size: 1/4” (6.35MM) hose barb to 1/8″ npt male pipe / tube connector, Degree: 90 degree elbow
- Made of high performance lightweight 6061-T6 cnc machined aluminum
- Surface treatment: black anodized finish for durability and strength
- AN adapter side seals on the flare (cone) not the threads and the NPT side seals on the threads
- Precision machined to exacting tolerances for trouble-free performance
Description
Male npt thread to an hose barb adaptor.
Use Teflon tape or sealing compound during assembly for proper sealing.
Also available in different size and color, pls contact us for more information.
3. LTWFITTING 90 Degree Elbow Brass Barb Fitting 3/8 ID Hose x 1/4" Male NPT Air Gas (Pack of 5)
4. POWERTEC 70127 2-1/2 Inch Key Hose Clamp | Stainless Steel 2.5” Thumb Screw Dust Collector Hose Clamps – 5 Pack
Feature
- INCLUDES: 2-1/2” Key Type Hose Clamps – Pack of 5
- APPLICATION: Allows you to secure your ductwork hoses and connect dust collection hoses to dust hoods, connectors, 2.5 inch blast gates, and other dust collection fittings
- EASY TURN: Hose clamp allows you to simply use the thumb screw clamp to quickly loosen or tighten it without the use of tools
- QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel
- VERSATILITY: Can be used indoor and outdoor for a wide assortment of home, automotive, and DIY woodworking applications – such as securing a dryer vent hose, duct work, piping, tubes, large cables and more
- Use with dust collection
- 5 pieces per pack
- Stainless Steel
- Clamping range: 2-Inch to 2-3/4-Inch
- Allow for tool-less adjustments
5. POWERTEC 70105 4-Inch Elbow Dust Hose Connector
6. POWERTEC 70128 4-Inch Flexible Dust Collection Hose
7. 1/4“od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight 8pack (1/4" Combo)
Feature
- utah pneumatic: push to connect air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
Description
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
8. Anderson Metals 57001-0402 Brass Hose Fitting, Adapter, 1/4" Barb x 1/8" NPT Male Pipe
Feature
- Adapter for connecting a hose to a male threaded connection of a different diameter
- Hose barb on one end and male NPT threads on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
9. Anderson Metals Brass Tube Fitting, 90 Degree Elbow, 3/8" Flare x 3/8" Female Pipe
Feature
- 90-degree elbow for connecting two pipes or tubes at an angle
- 45-degree flare connection on one end and an NPT female connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- 45-degree flared construction for a stronger connection than soldered
- Operating temperatures range from -65 to 250 degrees F
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
The Anderson Metals elbow is made of brass and has flare and National Pipe Taper (NPT) connectors. This 90-degree elbow fitting, also called “ell,” connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has a 45-degree flare connection on one end and an NPT female connection on the other. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term reliability, and for use in installations where flames or heat are not allowed. The operating temperatures range from -65 to 250 degrees F. This fitting is for use in fuel equipment, plumbing, gas, refrigeration, and vacuum applications. It is suitable for copper, brass, aluminum, and steel tubing.
Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Flared fittings are alternatives to solder-type joints and are used when the use of an open flame from a soldering iron is impractical or prohibited. The most common flare fitting standards are the 45-degree and 37-degree flare. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
10. Camco Brass Water Pressure Regulator with Gauge- Helps Protect RV Plumbing and Hoses from High-Pressure City Water – Easy Read Gauge, Lead Free (40064)
Feature
- Helps protect RV plumbing and hoses from high pressure city water
- Attaches easily with 3/4″ garden hose threads
- Pressure is factory pre set at 40 50 PSI
- Easy to read gauge indicates the regulated pressure
- Drinking water safe and csa low lead content certified
- Complies with California’s AB1953 and Vermont act 193, Maryland HB 372, and Louisiana HB 471 low lead content laws
Description
Camco’s Brass Water Pressure Regulator with Gauge helps protect your RV plumbing and hoses from damage caused by high-pressure city water. It features an easy-to-read gauge. Green color on the gauge indicates that the regulated pressure is between 40-50 psi. This pressure regulator attaches easily with convenient 0.75″ garden hose treads. The pressure is factory preset at 40-50lbs per square inch. Patented. For outdoor use only.
Conclusion
By our suggestions above, we hope that you can found 90 Degree Metal Vacuum Hose Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!
