Top 9 5Pcs 3Mm Thick 3D Printer Heating Block

0
821 reviews analysed

1. Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

Feature

Description

Note: The Ender 3 Extruder Head Kit Suitable for Creality Ender 3.
These are original replacement parts for Creality 3D printer Ender 3.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
Ender 3 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 24V 40W

– Installation type: External thread connection
– Application: Creality 3D printers ender 3
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 24V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass – Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Package list:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
5×1.75mm 0.4mm Brass Nozzle ( as free gift)

2. GODSHARK 10pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Extruder Heated Bed pre-Wired or Hot End

GODSHARK 10pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Extruder Heated Bed pre-Wired or Hot End

Feature

Description

The improvements compared to the other NTC 3950 100k thermistors in the market.

– Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement.

– The temperature measurement range is increased from -40 ℃~ +300℃. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, 100K thermistors are highly recommended for your 3D printers.

– The new version of 100k thermistor ensure the maximum service life with precision temperature measurement.

– NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.

– Can be used with the new version of the heater

Spec:

● Small Size: 1.25mmx2.0mm glass bead

● High accuracy: ±1%

● Resistance value at 25°C=100K

● Wiring insulation: high temperature teflon/PTFE

● Wiring length: 1 meter

● Operating temperature range: -40 ° C … + 300 ° C

● Dissipation power factor: ≥ 5MW / ° C (static air)

● Rated power: 45MW

● Thermal time constant ≤ 7S (static air)

● Temperature Coefficient of Resistance; -2-5% / ° C

Included:

10pcs NTC Thermistor 3950 100k

3. 22pcs 3D Printer Nozzles,MK8 Brass Extruder Nozzle Print Head and 7pcs Cleaning Needles for 1.75mm Makerbot Creality CR-10 ANET A8 CR-10 M6 3D Printer. (0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,1.0mm)

22pcs 3D Printer Nozzles,MK8 Brass Extruder Nozzle Print Head and 7pcs Cleaning Needles for 1.75mm Makerbot Creality CR-10 ANET A8 CR-10 M6 3D Printer. (0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,1.0mm)

Feature

4. BIQU Aluminum Heater Block Specialized for MK7 MK8 3D Printer Extruder(Pack of 5pcs)

BIQU Aluminum Heater Block Specialized for MK7 MK8 3D Printer Extruder(Pack of 5pcs)

Feature

Description

Specifications:
-Material: Aluminum
-Dimensions: 20*20*10mm(LWH)
-Net Weight: 7g/pcs
-Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
-Heater Mounting Hole: 6mm diameter
-Thermocouple Mounting Holes:3mm diameter
-Suitable for Makerbot printer

Package Included:
5*Aluminum Heater Block

5. Official Creality 3D Ender 3 Ender 3 Pro Ender 5 Tempered Glass Upgraded Build Plate Printing Surface for Heated Bed 235x235mm

Official Creality 3D Ender 3 Ender 3 Pro Ender 5 Tempered Glass Upgraded Build Plate Printing Surface for Heated Bed 235x235mm

Feature

Description

PLEASE NOTE: 

This surface is incredibly sticky at high temperatures for plastics such as PETG, PLA, and ABS. 

Once the print has finished, DO NOT immediately try to remove the model from the glass bed with force!! 

This glass bed must come down to room temperature for the advanced surface to “release” the model.

 Attempting to forcibly remove the print from the glass bed at high temperature WILL DAMAGE the proprietary surface.

Temperature settings for different filaments: 

1. PLA:50-70ºC 

2. Flexible filament: 50-70ºC 

3. ABS:100-125ºC ( 110ºCis recommended ) 

4. PC:100-130ºC ( 120ºC is recommended ) 

5. Nelon:90-120ºC ( 110ºC is recommended ) 

6. PP:100-130ºC ( 120 ºC is recommended ) 

7. PETG: 50-70ºC

6. Gikfun 100K ohm NTC B4267 ATC Semitic 104GT-2 Thermistor for 3D Printer Reprap (Pack of 10pcs) EK9018

Gikfun 100K ohm NTC B4267 ATC Semitic 104GT-2 Thermistor for 3D Printer Reprap (Pack of 10pcs) EK9018

Feature

Description

10Pcs 100K ohm NTC B4267 ATC Semitic 104GT-2 Thermistor For 3D Printer Reprap

7. Geesatis 5 Pcs 3D Printer E3D V6 Sensor Heater Block PT100 3D Printer Specialized for 3D Printer Extruder MK7 MK8, Aluminum, Silver

Geesatis 5 Pcs 3D Printer E3D V6 Sensor Heater Block PT100 3D Printer Specialized for 3D Printer Extruder MK7 MK8, Aluminum, Silver

Feature

Description

Warranty: Amazon 30-Day Money Withdraw Guarantee!

Product Specifications:
Product Name: Heat Block
Model: E3D-V6
Size: 23 x 15 x 11 mm / 0.9 x 0.6 x 0.45 inch
Inner hole of the heater tube: 6mm / 0.24 inch
Inner hole of the thermocouple/thermistor: 3mm / 0.12inch
Feature: Fast Heating
Color: Silver
Weight: 48 g
Material: Aluminum

Package Content:
5 Pcs X Heat Block

Tip: There might be 1-3mm error in the manual measurement, please take it into consideration!

We have strict selection of materials and highly demanding production process.
We try our best to make the details of the products and keep perfect for the package during the delivery process,ensure that the package received by the customer is not damaged and the number of specifications is clear.

8. Glarks 30Pcs 3D Printer Nozzle with Spanner Set, 28Pcs 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Brass Extruder Print Head Hotend Nozzle Compatible with MK8 Makerbot Creality CR-10 M6 Thread 3D Printe

Glarks 30Pcs 3D Printer Nozzle with Spanner Set, 28Pcs 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Brass Extruder Print Head Hotend Nozzle Compatible with MK8 Makerbot Creality CR-10 M6 Thread 3D Printe

Feature

Description

Glarks 30Pcs 3D Printer Nozzle with Spanner Set, 28Pcs 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Brass Extruder Print Head Hotend Nozzle Compatible with MK8 Makerbot Creality CR-10 M6 Thread 3D Printer

♣【Specification:】
Material: Brass
Color: Gold
Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm
Input diameter: 1.75 mm
Screw thread: M6
Total Quantity: 28pcs

♣【Package Detail:】
0.2mm 3D printer nozzles x 3pcs
0.3mm 3D printer nozzles x 3pcs
0.4mm 3D printer nozzles x 10pcs
0.5mm 3D printer nozzles x 3pcs
0.6mm 3D printer nozzles x 3pcs
0.8mm 3D printer nozzles x 3pcs
1.0mm 3D printer nozzles x 3pcs
17mm Spanner x 1
21mm Spanner x 1
Total Quantity:30pcs

♣【How to change the nozzle:】
✿ Prepare the nozzle, spanner, wrench.
✿ Heating. Turn on the 3d printer, set the nozzle temperature to target (PLA: 80-220, ABS: 240-280).
✿ Removing. After the heat done, use spanner to hold the heat block firmly, then use the wrench to screw old nozzle out.
✿ Adding. Put new nozzle to the socket and screw nozzle in, make sure the screw in tight and the work done.
✿ Warm Prompt: When heating, the old nozzle will be very hot, please do not touch them by hands.

♣【Quality Assurance:】
If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time.

9. MK8 Extruder Nozzles 3D Printer 0.1mm Nozzles for Makerbot Creality CR-10 Ender 3 5 Series

MK8 Extruder Nozzles 3D Printer 0.1mm Nozzles for Makerbot Creality CR-10 Ender 3 5 Series

Feature

Description

Product Name: MK8 nozzle

Product material: brass

Product use: 3D printing

Product size: 13mm*6mm

Product color: yellow

Conclusion

By our suggestions above, we hope that you can found 5Pcs 3Mm Thick 3D Printer Heating Block for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general