955 reviews analysed
1. Carejoy 5 Gallon Stainless Steel Vacuum Degassing Chamber Silicone Kit with Pump Hose
Feature
- Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone. Built-in valve and gauge provides ease of use and convenience. Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg
- 50 micron air filter reduces air flow back into the chamber for purging and prevents dust and debris from entering the chamber
- Hydro-tested stainless steel container is high strength, very durable and withstands up to 160ºF
- 5 foot collapse-proof steel wire reinforced hose easily withstands any vacuum pressure you throw at it and features
- Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood, extracting essential oils from organic materials, etc.
Description
Features:
1/4HP 3CFM Single Stage Vacuum：
1.Heavy-duty Aluminum Alloy Casing
2.Direct Drive Motor Allowing Easy Starting and is Maintenance Free
3.Oil Sight Glass for Monitoring Oil Levels
4.With Oil Drain Plug Positioned at Bottom of Oil Reservoir
5.Internal High Volume Cooling Fan for Extended Use
6.Exhaust Port with Exhaust Cap
7.Non Slip Cushion Handle
5 Gallons (21 Liter) Chamber：
1.Heat cured silicone gasket is chemically resistant to solvents like butane and does not loose vacuum over time
2.Heavy duty 3/4″ shatter resistant acrylic crystal lid allows you to see inside and bulletproof
3.Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg.
4.Both the release valve and ball valve are built into a single unit for ease of use
5.Durable brass fittings fit all vacuum pump ports
6.4.75″ x 4.75″ non stick silicone pad allows you to easily remove resin mixes
7.Max vacuum rated to 29.9inHg at sea level
8.Our vaccum chamber pairs perfectly with single or dual stage 3 to 9 CFM pumps
Package including:
1* 5 Gallon Vacuum Chamber
1* 3/4″ Acrylic Lid
1* Heat Treated Silicone Lid Gasket
1* Glycerin Filled Gauge with Brass Fittings
1* 50 Micron Air Filter
1* Non-Stick Silicone Pad
1* 5 Foot Steel Wire Collapse-Proof Hose
1* Instruction Manual
1* 1/4HP 3CFM Single Stage Vacuum Pump
1* Bonus Vacuum Oil
2. ABLAZE 5 Gallon Gal Vacuum Chamber Stainless Steel Degassing Urethanes Silicone Epoxies Lid Kit
Feature
- Maintain high vacuum for over 24 hours
- Chamber tested before shipping
- LIFETIME warranty on Lid Seal and Chamber
- Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood, extracting essential oils from organic materials, etc
- Chamber Size: (L)11” x (H)11″ (Without Lid)
3. BACOENG 5 Gallon Vacuum Chamber Kit with 3.6 CFM 1 Stage Vacuum Pump HVAC
Feature
- 5 Gallon Vacuum Chamber kit used to degass silicones, epoxies, essential oils, urethanes, etc.
- Silicone gasket to be used over 10,000 times without deterioration.
- Chamber Kit Include: 3gl SS Base
- Acrylic Lid, Silicone Gasket
- Vacuum Gauge
- Air Manifold With Valves
- 5ft Hose
- Vacuum Pump Voltage:110V 60HZ Power: 1/4 HP Single Stage 3.6CFM
- Pump Ultimate Vacuum : 0.8 Pa
- Intake fitting: 1/4 inch Flare Oil Capacity : 220 ml
Description
Related Series: Only Items in Bold are available on Amazon.
- Universal Chamber Series:1.2Quart/2Quart/1.5Gallon/3Gallon/5Gallon. ( a.co/6FhbPAw )
- BACOENG Chamber Series: 2Quart/1.5Gallon ( a.co/dGQZsqm; a.co/gGmUEnb; )
- BACOENG Vacuum Pump Series : Mini/Standard/Advanced/Premium ( a.co/euZtOXz )
- BACOENG Vacuum Chamber Kit: 1.5GallonKit/3GallonKit/5GallonKit. All Equipped with BACOENG Vacuum Pump Standard. ( a.co/dpnJv3r; a.co/evTRJbw)
- BACOENG AC Recharge Kit: With Mini Pump/With Standard Pump
Specifications:
- Pumping speed: 3.6 CFM
- Ultimate vacuum: 0.8Pa
- Rotating speed: 1720 Rpm
- Oil capacity: 225 ML
- Power: 1/4 HP
- Voltage: AC 110V
- Inlet valve: 1/4″ SAE
Features:
- 3.6 CFM Single-Stage Rotary Vane gas vacuum pump
- High efficiency and Low Noise Decibels
- Heavy-duty aluminum Alloy Casing
- Direct Drive Maintenance Free Motor permitting straightforward starting
- Clear Oil Sight Glass to easily monitor Oil Level
- Internal High Volume Cooling Fan for Extended Periods of Use
- Exhaust Port with an included Exhaust Cap
Note:
Using some solvents such as Cactus Juice, Gator Venom, Minwax, alcohol, ethanol, acetone, and acrylic based monomers or polymers can cause a chemical reaction with the acrylic lid and cause cracks to it. If you work with the above solvents, please purchase the BACOENG 2018 new tempered glass lid vacuum chamber product.
4. BACOENG 5 Gallon Vacuum Chamber Kit with Vacuum Pump Standard HVAC
Feature
- 5 Gallon Vacuum Chamber kit used to degass silicones, epoxies, essential oils, urethanes, etc.
- Silicone gasket to be used over 10,000 times without deterioration.
- Chamber Kit Include: 5gl SS Base
- Acrylic Lid, Silicone Gasket
- Vacuum Gauge
- Air Manifold With Valves
- 5ft Hose
- Vacuum Pump Voltage:110V 60HZ Power: 1/4 HP Single Stage 3.6CFM
- Pump Ultimate Vacuum : 0.8 Pa
- Intake fitting: 1/4 inch Flare Oil Capacity : 220 ml
Description
Related Series: Only Items in Bold are available on Amazon.
- Universal Chamber Series:1.2Quart/2Quart/1.5Gallon/3Gallon/5Gallon. ( a.co/6FhbPAw )
- BACOENG Chamber Series: 2Quart/1.5Gallon ( a.co/dGQZsqm; a.co/gGmUEnb; )
- BACOENG Vacuum Pump Series : Mini/Standard/Advanced/Premium ( a.co/euZtOXz )
- BACOENG Vacuum Chamber Kit: 1.5GallonKit/3GallonKit/5GallonKit. All Equipped with BACOENG Vacuum Pump Standard. ( a.co/dpnJv3r; a.co/evTRJbw)
- BACOENG AC Recharge Kit: With Mini Pump/With Standard Pump
Specifications:
- Pumping speed: 3.6 CFM
- Ultimate vacuum: 0.8Pa
- Rotating speed: 1720 Rpm
- Oil capacity: 225 ML
- Power: 1/4 HP
- Voltage: AC 110V
- Inlet valve: 1/4″ SAE
Features:
- 3.6 CFM Single-Stage Rotary Vane gas vacuum pump
- High efficiency and Low Noise Decibels
- Heavy-duty aluminum Alloy Casing
- Direct Drive Maintenance Free Motor permitting straightforward starting
- Clear Oil Sight Glass to easily monitor Oil Level
- Internal High Volume Cooling Fan for Extended Periods of Use
- Exhaust Port with an included Exhaust Cap
Note:
Using some solvents such as Cactus Juice, Gator Venom, Minwax, alcohol, ethanol, acetone, and acrylic based monomers or polymers can cause a chemical reaction with the acrylic lid and cause cracks to it. If you work with the above solvents, please purchase the BACOENG 2018 new tempered glass lid vacuum chamber product.
5. BACOENG 5 Gallon Tempered Glass Lid Stainless Steel Vacuum Chamer Perfect for stabilizing Wood, Degassing Silicones, Epoxies and Essential Oils
6. PBAUTOS Vacuum Chamber Stainless Steel, Tempered Glass Lid Pressure Degassing Chamber, Pressure Pot for Resin Casting, Stabilizing Wood Products, Degassing Silicones and Essential Oils (5 Gallon)
Feature
- 【Durable Material】: It is made of high strength stainless steel, acrylic crystal lid is durable and sturdy, can provide a good visibility for work, it is bulletproof.
- 【Noise Reduction】: Equipped with 2 silencers to reduce the gas releasing noise.
- 【High Precision】: Accurate glycerin filled gauge, resist vibration and maintain the accuracy of the level gauge, and keep the accuracy within 0.5inHg. The vacuum can be kept over time after turning off the inlet valve.
- 【Easy Installation】: You can easily install them in just a few minutes without the help of any special tools. Complete parts, no need to worry that you can’t find the parts you need.
- 【Wide Application】: The vacuum chamber is applied to degass silicones, epoxies, essential oils, and urethanes, etc. It’s perfect for stabilizing wooden products, industry and other experiments.
Description
●Stainless Steel Chamber:
Made of high-strength stainless steel, the chamber is good at corrosion resistance, heat and chemical resistance. The high-quality materials can hold a high vacuum for several hours.
●Accurate Gauge:
Upon special treatment, the reading is accurate. The outlet valve has an air filter to reduce airflow and prevent dust from entering the chamber.
●Silicone Gasket:
The silicone gasket is durable and sturdy. It is chemically resistant to solvents, such as butane.
●Acrylic Crystal Lid:
Acrylic crystal lid is impact-resistant. And its excellent transparent and large window provides enough visibility for work.
●Specifications:
Chamber Dimension: 12.3″*12.3″*11.8″/31.3*31.3*30cm (Without Lid)
Volume: 5 Gallon
Lid Diameter: 12.8″/32.5cm
Thickness of the Lid: 3/4″
7. BACOENG 3 Gallon Tempered Glass Lid Stainless Steel Vacuum Chamber Perfect for Stabilizing Wood, Degassing Silicones, Epoxies and Essential Oils
8. Lab Vacuum Chambers 5 Gallon vinmax Stainless Steel Vacuum Degassing Chamber Silicone Kit w/3 CFM Pump Hose
Feature
- 【Heavy Duty】- The vacuum chamber is perfect for removing gases from compounds which have become entrapped in the mixture when mixing components.
- Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins.
- 【Functions】- Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone. Clear lid allows for you to see air being vacuumed out of your resin mix.
- 【Simple Structure】- Built-in valve and gauge provides ease of use and convenience. Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg.
- This vacuum chamber is perfect for applications like degassing urethane, silicone, epoxies, stabilize wood, extracting essential oils from organic materials, etc.
Description
Features:
1/4HP 3CFM Single Stage Vacuum：
Direct Drive Motor
Oil Sight Glass for Monitoring Oil Levels
Internal High Volume Cooling Fan for Extended Use
5 Gallons (21 Liter) Chamber：
Heat cured silicone gasket
Heavy duty 3/4″ shatter resistant acrylic crystal lid
Hydro-tested stainless steel container is durable and withstands up to 160ºF
Accurate to within 0.5inHg.
5 foot collapse-proof steel wire reinforced hose easily withstands any vacuum pressure you throw at it and features
50 micron air filter reduces air flow back into the chamber for purging and prevents dust and debris from entering the chamber
Specifications:
1/4HP 3CFM Single Stage Vacuum：
Power Voltage 110V, 60Hz
Motor Power 1/4HP, 3 CFM
Pump Speed 1720 RPM
Oil Capacity 250ml
Micro Rating 75 Microns (10pa)
Specifications:
5 Gallons (21 Liter) Chamber：
Maximum Rated Vacuum：29.9inHg @ sea level / 24.82 @ 5000ft
Hose Connector：1/4″ SAE w/ 45º Seat
Chamber Max Temp：160ºF
Gauge Style：Gylcerin Filled
Chamber Dimension：10-7/8″ x 11-7/8″ (Without Lid)
Overall Dimension：11-5/8″ x 12-5/8″
Package including:
1 *5 Gallon Vacuum Chamber
1*3/4″ Acrylic Lid
1*Heat Treated Silicone Lid Gasket
1*Glycerin Filled Gauge with Brass Fittings
1*50 Micron Air Filter
1*Non-Stick Silicone Pad
1*5 Foot Steel Wire Collapse-Proof Hose
1*Instruction Manual
1*1/4HP 3CFM Single Stage Vacuum Pump
1*Bonus Vacuum Oil
9. Best Value Vacs 5gvac Vacuum and Degassing Chambers, 5 gal Capacity
Conclusion
By our suggestions above, we hope that you can found 5 Gal Vacuum Degassing for you.Please don’t forget to share your experience by comment in this post. Thank you!
