785 reviews analysed
1. Signswise 200x200mm 12v 150w Silicone Rubber Heating Heater for 3d Printer Heated Beds
2. Signswise 200x200mm 12V 220W Silicone Rubber Heating Heater for 3D Printer Heated Beds
3. USA Material CR10 S4 Silicone Heater Pad 400x400mm for CR-10 S4 3D Printer Bed w/Screw Holes, Adhesive Backing + Sensor (120V)
Feature
- high temperature silicone heater pad for Creality CR-10 S4 3D printer
- This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
- With 1.2meter NTC 100K 3950 thermistor for temperature Control (Choose Number 1 in the Marlin firmware)
- Please DO NOT POKE NEW HOLES for this bed as the whole pad is a circuit, so it will 100% damage the circuit if you poke new holes anywhere
- Important Notes: Please heat only after being mounted onto the plate. Do Not heating without proper heat-sink.
Description
This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
Backing:3M adhesive backing
Size: 400mmx400mm
It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters
Much safer and more reliable heat source than RepRap PCB heatbeds.
With 1.2meter NTC 100K 3950 thermistor for temperature Control.
Power consumption: 1000W.
Attached with two pieces 1.2meter length power wire
4. High Temperature Ender-3s Flexible 235x235mm Silicone Heater 120V Heated Bed Build Plate Adhesive Backing + Sensor for Creality Ender-3 Ender 5 Ender 3 Pro 3D Printer (120V 500W)
Description
Package: 1piece
Backing:3M adhesive backing
Size: 235mmx235mm
It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters
Much safer and more reliable heat source than RepRap PCB heatbeds.
With 1.2meter NTC 100K 3950 thermistor for temperature Control (choose number 1 or 11 in the marlin firmware for the bed temperature sensor).
Power consumption: 500W for 120v and 220v, 300w for 24V .
Attached with two pieces 1.2meter length power wire
5. 12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater for 3D Printer MK10 Extruder/Hotend
Feature
- 12 Volt 40 Watt (12v 40w) MK10 3D Printer Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter and 1m Wire
- Designed to be the proper OEM fit for 3D printers with a MK10 extruder and a 6.35 mm (1/4 inch) heater block bore
- Compatible with Wanhao Duplicator i3, FlashForge Creator, Monoprice Maker Select v1/v2/v2.1 FDM/FFF Printers with 1/4in heater hole
- Length: 20mm / Diameter: 6.35mm – Wire Length: 100cm
- 1/4 (0.25in) US Standard Size Often Hard to Find – Used on many American and Chinese Made 3d Printers designed for the US Market
Description
12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater
Fits Many MonoPrice/Flashforge/Wanahoo MK10 3D Printers with a 1/4in 6.35mm Bore Heater Hole
Please NOTE: This is a variation listing – You must select your voltage (12v or 24v) from the drop down menu at the top of the page
Specifications: Product: Single-head heating tube
Diameter: 1/4 inch / 6.35mm Length: 20mm
Wire Length: 3ft 3in / 1m Voltage: 12 Volt
Power: 40 Watt
Package Contents: 1pc – 40W 12V Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter
6. Wisamic Silicone Rubber Heater 310x310mm 120V 750W, with 3M Tape Screw Holes for 3D Printer CR-10 CR-10S S3
Feature
- The silicone rubber heater can prevent condensation in motors or instrument cabinets.
- Applications for food service equipment, airplane engine heaters, aerospace industry, drums and other.
- Material Type:cuprum
- Color: orange
- Thermistor: 100K “3950”
- Comes with 4 pre-made screw holes as the picture.
- Specially designed to fit the 3D Printers CR-10 CR-10S S3. Excellent heat source for your CR-10/10S3D Printer.
Description
Features:
*Durable silicone rubber construction
*Extremely even distribution of heat
*Moisture proof and chemical resistance
*Industrial duty cycles for Long life
Specification:
310x310mm
Thickness: about 1-1.5mm
Rated Power: 750W
Thermistor: 100K “3950”
Tape: 3M
Working temperature: -62～235℃ (suggested )
Temperature: below 180℃
Package content:
1 x Silicone rubber heater
7. Signstek 10 PCS Reprap 12V 40W 620 Ceramic Cartridge Heater for 3D Printer Prusa Mendel
8. GENNEL 100g Thermal Grease Paste, Heatsink Paste, High Heat Dissipation Performance, Thermal Conductive Compound Paste for CPU/GPU/Chip Cooling
Description
* 100% New.
* High heat dissipation performance:Helps disperse the heat from CPU to heatsink effectively
* Applicable to: CPU, VGA, GPU, LED, chipset etc.
* High temperature resistance, Non-toxic, tasteless, non-corrosive
* Net Weight: 100g
* Thermal Conductivity: >3.17W/m-k
* Thermal Resistance: <0.067°c-in² .="">
* Color: Silver
Package Includes
1x 100 gram Silver thermal grease paste.
9. Kingprint Imported Silicone Heated Bed Mat 230×230mm 24V 200W, Heater Hotbed Plate with NTC 3950 100K Thermistor 3M Adhesive Backing for Ender 3
Feature
- Size: 230X230 mm
- Power Supply: 24V 200W
- Suitable for Ender 3 printer.
- Easy to install, comes with 3M adhesive on the back.
- Sophisticated heating board circuit evenly heats the entire surface.
- It can only be heated after it is installed on the build plate (aluminum plate is recommended).
- After-sales support: If you encounter any problems, you can contact us by email. We are happy to help you.
Description
Imported Silicone Heated Bed Mat 230×230mm 24V 200W
Product Specification
Material: Silica Gel
Size: 230*230mm
Voltage: 24V
Power Rating: 200W
Wiring Length: 700mm
Mounting Type: 3M Adhesive
Thermistor Type: NTC 3950 100K
Item Type: Thermal Paper
Range: for 3D Printer Parts
Color: Brown
The silicone heating plate has good chemical resistance and can be used in moisture and corrosive gases enviroments.
The heated bed is mainly composed of nickel-chromium alloy electric heating wire and silicone rubber high-temperature insulating cloth.
Precision metal heating plate circuit can improve the uniformity of surface heating power.
Good weather resistance and aging resistance, which greatly prolongs the service life of the product.
10. BCZAMD 235 X 235mm 120V 500W Silicone Rubber Heater Mat/Pad with NTC 100K Thermistor 3M Adhesive for 3D Printer Parts
Feature
- Size: 235 X 235mm/ 9.25 X 9.25 inch, Power: 120V 500W.
- Surface mount NTC 100K thermistor, the backing comes with 3M Adhesive.
- Improted Rubber Silicone, excellent heat source, evener heating across the whole surface.
- Suggest working temperature: -62～200℃ ( Note: the silicone mat’s temperature will heats up quickly, please take anti-scalding measures! ).
- After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
Description
We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineer of technical team will always support you here.
Feature:
– Wonderful silicone heater for your 3D printer heat-bed, also can use for food service equipment, airplane engine heaters, aerospace industry, drums and other cnc machine.
– Moisture proof and chemical resistance
– Durable silicone rubber hot bed, uniform heat transfer, works well in especially at high temperatures or in long time heating process.
Specification:
Material: Improted Rubber Silicone
Size: 235 X 235mm/ 9.25 X 9.25 inch
Thickness: about 1-1.5mm
Rated Power: 500W
Thermistor: 100K “3950”
Tape: 3M
Working temperature: -62～235℃ (suggested )
Temperature: below 180℃
Package includes:
1 x 235 X 235mm (approx. 9.25″ X 9.25″) 120V 500W Silicone Rubber Heater
Conclusion
By our suggestions above, we hope that you can found 3950 Silicone Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!
