Top 10 20 Hp Electric Propulsion Outboard

Product Description

Get the power of a gasoline outboard without the noise and fumes. Perfect for gasoline-restricted lakes, E-Drive features 2 HP of muscle to move a full-size pontoon up to 5 mph on a single charge. Digital Maximizer: Trolling motors equipped with Digital Maximizer provide up to 5 times longer run times on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing. Electronic Throttle Control: E-Drive’s throttle control features forward/neutral/reverse positions and push-button tilt up/down. It mounts easily on the binnacle or side-mounts on the cockpit. Stainless Steel Prop: This corrosion-fighting prop utilizes a special protective sheer pin and replaceable, hub-mounted zinc anode to combat corrosion. Remote Speed Control: Engine Mount comes with an 18′ corded remote that delivers infinitely variable speed control in forward and reverse. Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.

Amazon.com

Ideal for lakes and other closed bodies of water where gasoline and noise restrictions apply, Minn Kota’s E-Drive Electric Outboard motor delivers 2-horsepower energy without the fumes or emissions of gasoline. This quiet and efficient motor will move a full-sized pontoon boat up to 5 miles per hour and can run for up to 2 hours at 100 percent on a single charge.

The E-Drive Motor comes with a bolt-on transom mount that connects directly to your boat’s standard cable linkage and that includes a special tilt-lock mechanism for safe and secure trailering. The motor features a Electric Throttle Control for ultra-response ease of use, allowing you to control forward/neutral/reverse positions with your fingertip. The motor’s Digital Maximizer optimizes draw to extend the battery life and reduce damaging heat for up to five times more runtime on a single charge. In combination with Minn Kota’s signature, cool, quiet power, the fish will never know you are coming.

Additional features that distinguish the E-Drive from the competition include a realtime battery gauge ensuring that you never get stranded, the tilt gauge providing an instant readout of motor position, the E-Drive tiller for convenient control, and the intelligently designed Minn Kota Actuators that operate smoothly, quietly, and dependently and feature the industry’s highest IP68 waterproof rating. Built to last, the E-Drive Electric Motor is backed by a two-year warranty from Minn Kota.

Specifications:

• Maximum Thrust: 2 horsepower
• Volts: 48
• Runtime: up to 2 hours at 100 percent per charge
• Shaft Length: 20 inches
• Mount: Bolt-on Transom
• Control: Outboard Cable Linkage
• Speeds: Variable
• Prop: Stainless Steel

Features:

• Digital Maximizer: The Digital Maximizer optimizes draw to extend battery life and reduce damaging heat–helping you stay on the water up to five time longer on a single charge. By regulating power, the Digital Maximizer delivers the precise amount of power needed at any speed with rapid on/off switching from the battery connection to control speed more efficiently than speed coils can. If ‘on’ time is longer compared to ‘off,’ the motor receives more power. If ‘off’ time is longer, the motor gets less power. Since there is minimal power lost to accomplish this, the overall motor is very efficient. With variable speed control, the Digital Maximizer allows for proper speeds to be set and maintained while trolling lures for proper presentation. Fine-tuned speed adjustments and virtual speed adjustments allow the user to control boat speed more effectively in changing environments.
• Electronic Throttle Control: The ultra-responsive throttle lever delivers fingertip control with forward/neutral/reverse positions and push-button tilt up/down. The throttle mounts either on the binnacle or side mount at the cockpit, and features a key switch for added safety.
• Bolt-on Transom Mount: Minn Kota’s standard E-Drive motor features a bolt-on transom bracket that includes a power tilt mechanism and a built-in breakaway mount that protects the motor from underwater hazards.
• Tilt Gauge: A dash-mounted tilt gauge provides an instant readout of motor position.
• E-Drive Tiller: The E-Drive Tiller model allows for comfortable, convenient control with its exclusive Tilt Tiller.
• Minn Kota Actuators: E-Drive models are powered by intelligently designed actuators with 12V DC motors. They operate smoothly, quietly and dependably, and also feature the industry’s highest IP68 waterproof rating.
• Realtime Battery Gauge: Instantly see how many hours of runtime you have left on your battery with this realtime, back-lit gauge. It also features a fuel gauge showing battery condition, as well as throttle power level.
• Stainless Steel Prop: A special sheer pin protects this stainless steel prop from damage when encountering underwater obstacles. The prop also features a replaceable, hub-mounted zinc anode to fight galvanic corrosion.
• Cool, Quiet Power: No motors runs cooler or more quietly than a Minn Kota does. The Minn Kota is constructed with extra large windings and commutators to dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. Minn Kota’s unique bearing system reduces friction to cut fish-spooking noise–making the motor so quiet, they’ll never hear you coming.

About Minn Kota:

With over 75 years of innovation and power on the water, Minn Kota Motors has been delivering some of the best-built trolling motors in the world for three quarters of a century. Beginning in 1934 in Fargo, North Dakota, Minn Kota began with Mr. O. G. Schmidt’s invention of the trolling motor. Because of its proximity to the MINNesota–North DaKOTA border, The Minn Kota Manufacturing Company name was born. Since its founding, Minn Kota has led the way in product innovation and cutting-edge technology with a long list of ‘firsts’ that include: first electric gear-driven motor (1934); first electric motor with reverse switch (1965); first built-in electronic/variable speed control (1986); first computer-controlled motor, first self-steering unit (AutoPilot) (1991); first fully automatic trolling motor (Genesis) (1999); and first DualBeam integrated transducer – 83kHz/200kHz with temperature sensing (Universal Sonar 2) (2007) among numerous other innovations in its 75 years of business.

Manufacturer Warranty
Two years

Zinnor Boat Engine Outboard Boat Motor helps you make life more easier and enjoyable.

▶Item Features

☑ Features 360 degree steering rotation for reverse without gear shifting.

☑ Superior engine air cooling system for improved engine performance.

☑ Easy pull off engine cover with push button latch for instant motor access.

☑ Vertical mount engine design for increased power, performance and durability.

☑ Twist grip throttle handle and engine stop button for improved response.

☑ Durable cast aluminum construction for superior corrosion protection.

☑ Through the prop exhaust outlet for decreased noise and pollutants.

▶Item Specification

Item Type: Boat Engine

Model: 3.6HP

Max.Output: 2.6KW/3.6HP

Overall L×W×H(mm): 920×365×220cm/36.2×14.4×8.7inch

Transom Plate Height: 42CM

Full throttle operating range (rpm): 5000-6000

Engine stroke: 4

Cylinder: 1

Displacement: 55CC

Net Weight: 9.70KG

Gear Ratio: 2.08(27:13)

Gear Shift Position: Clutch Control

Trim and tilt system: Manual Tilt

Ignition System: CDI

Cooling System: Air-cooled

Starting System: Manual

Control System: Tiller

Integral fuel tank capacity: 1.8L

Recommended Propeller range: 3.5″-6″

Recommended fuel: #93 Lead-free gasoline

Recommended Lubricant: 4 stroke lubricant

Maximum fuel waste: 0.8

▶Warm Attention

1. Please add oil before use new machine. Please use high quality 4 stroke gasoline engine oil. Do not use inferior brand of inferior oil. Add about 350ml of oil. New machine run-in period: 8-10 hours to replace the oil, after run-in period: 30 hours to change the oil.

2. The four-stroke outboard oil tank can only be filled with pure gasoline, and the oil tank should use four-stroke special oil.

Water Pump Impeller for Nissan Tohatsu Outboards 9.9HP-15HP-18HP-20HP Boat Motor Engine Parts Replacement Honda Outboards 7.5-10-75-100 HP 19210-935-003 19210-935-A01. 

Cross Reference: 334-65021-0 334650210M 334650210.

It replaces Sierra Marine Outboards P/N: 18-8921.

Specification:

Material: Neoprene and Plastic

Number of Blades: 8

Shaft Diameter: 0.550 inch

Overall Diameter: 1.622 inch

Impeller Height: 0.937 inch

Net Weight : 20 g

Applications:

Fit the following 2,4 stroke Nissan Tohatsu Outboard Engine:

4 stroke : F18B2 F15B2 F9.9B2 F20C F15C F9.9C MFS9.9C MFS15C MFS20C

2 stroke : 18E2 15D2 9.9D, M9.9D2 M15D2 M18E2 M16A2 M20A2 M25A2

9.9 (All), 15 (All), 18 (All), 9.9 4-Stroke (All B Models), 15 4-Stroke (All B Models), 18 4-Stroke(All)

Fits Honda Outboard Motors engine by year and model: 

Water Pump Impeller P/N Hub with key drive  19210-935-003 19210-935-A01 Replaces Sierra 18-8921

7.5HP Pre 1997 BF75, BF75Z, B75K1,B75K2,B75K3, 

10HP Pre 1997 BF100 BF100Z 

75HP 2007 & Later BF75Z 

100HP 2007& Later BF100Z 

Package Included:

1pc x Water Pump Impeller

NOTE:  

It is VERY IMPORTANT to Check your Outboard Engine Model, Horsepower or Year  before Purchase. If you have any questions please do not hesitate to ask.

Product Notice:
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Don’t do the following will avoid cylinder Scoring:
1. start the motor on bank;
2. use the motor when it stop coming out of water.

Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
You have to prepare a boat-motor stand or Hanging board on your boat.
Must Read before using:
Firstly, Fill the gear oil (open gear box lid and fill it);
Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times;
Thirdly, Fill engine oil don’t exceed the head of the pattern;
Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%;
Then, Rapidly pull the starter line. After the motor start, please turn the throttle to running state.

Specifications:
Brand: HANGKAI
Short shaft: 40cm
Displacement: 123CC
Gear ratio: 2.08(27:13)
Cylinder: 1
Max.Output(kw): 4.8
Max.speed(r/min): 5000-6000
Gear Positions: F-N-R
Packing size: 114x64x41cm
Ignition System: CDI
Cooling System: Water-cooling
Control System: Tiller control
Starting System: Manual start
Control System: #93 gasoline
N.W./G.W.(kgs): 26/31.2
Bore x Stroke(mm): 59×45
Recommended Propeller range: 3 -7″x9″
Recommended Lubricant: Four Stroke Lubricating oil
Mixing ratio: Pure gasoline
Trim and tilt system: Manual Tilt
Overall LxWxH(cm): 78.3×34.3×103.9
Standard fuel tank capacity: 12L

Bonus Accessories:
Brochures, tubing, cotter pins
Pump impeller, start rope, start key
12 liter fuel tank, tool kit, spark plug, cylinder head pad

Application:

Fits Suzuki Outboard Motor:

For Suzuki   

DF 9.9 – 1997 – 2006

DF 15 – 1997 – 2006

DT 9.9 – 1983 – 1987

DT 15 – 1983 – 1988

DT 15c – 1989 – 1997

Will also service Johnson Evinrude

J10 and J15 2002-2006 Four stroke

Fits All Two And Four Stroke Models Listed:

DF15AW

DF15K1

DF15K2 

DF15K3

DF15K4

DF15K5

DF15K6 

DF15K7 

DF15X 

DF15Y 

DF9.9AW 

DF9.9K1 

DF9.9K2 

DF9.9K3

DF9.9K4

DF9.9K5 

DF9.9K6

DF9.9K7 

DF9.9X 

DF9.9Y 

DT9.9 

DT15 

DT15C

Product Description

Model:48V 4.0JET PUMP

Rated power:1000W

Starting system:Accelerated start

Motor type:Brush-less motor

Rated Voltage:48V

rated current:21A

Control system:Tiller control

Max speed:15km/h

Overall L*W*H:365*220*920mm

N.W/G.W:10/11kgs

Packing size:95*42*29cm

Transom plate height:420mm 

Battery model recommendation:30~120A safe storage battery,maximum power sustainable 2~8hours

(1) Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor

(2) A muffler works for the motor to decrease the noise.

(3) Omni-directional rotary joystick

(4) Anti-winding function when Increase the thickening of the propeller

(5) Aluminum alloy suspension bracket: 90° rotatable bracket, more stable and durable.

(6) Easy to install, the motor can be mounted on board without any tools

Our products are shipped from the United States, we will serve you 24 hours, if you have any questions, please contact us in time.

Water Pump Impeller 17461-96312 for Suzuki Outboard 20HP 25HP 30HP 35HP 40HP 50HP 60HP Boat Motor Engine Parts Replacement 17461-96311 17461-96310.

Cross Part Number: 17461-96302, 17461-96301, 17461-96300.

It also replaces Sierra Marine 18-3096 18-8904.

SPECIFICATION:

Material: Neoprene and Plastic Hub

Number of Blades: 6

Internal / Insert / Hub / Shaft Size: 0.673 inch

Overall / Outer / External Diameter: 2.657 inch

Depth / Height / Width/Thickness: 0.629 inch

Net Weight : 20 g

APPLICATION:

Fits 4 Stroke Suzuki Outboards Engine Model: 

25hp DF25 2000 & UP

30hp DF30 2000 & UP

40hp DF40 1999 & UP

50hp DF50 1999 & UP

60hp DF60 2010 & UP

Fits 2 Stroke Suzuki Outboards Engine Model: 

20hp DT20 1986 & UP

25hp DT25 1983 & UP

30hp DT30 1983 & UP

35hp DT35 1987 & UP

40hp DT40 1984 & UP

May also Fit Evinrude Johnson OMC BRP Outboard Engine 199-2001.

25hp 1999 & UP

30hp 1999 & UP

40hp 1999 & UP

50hp 1999 & UP

Package Included:

1 piece x Water Pump Impeller

NOTE:  

It is VERY IMPORTANT to Check your Outboard Engine Model, P/N, Horsepower or Year before Purchase. If you have any questions please do not hesitate to ask.