Top 8 15 Vacuum Guage

Robinair’s No. 15150 VacuMaster Economy Vacuum Pump is a high performance, 2-Stage rotary vane design vacuum pump designed for air conditioning and refrigeration service. With a 1.5 CFM free air displacement, factory rating to 50 microns, and 7.4 ounce oil reservoir, this unit has the capability to get your job done. This rugged unit features a 1/4 HP, 115V/60Hz thermally protected motor; an inlet fitting engineered for maximum airflow while preventing oil backflow; finned aluminum surfaces that dissipate heat faster (keeping pump cooler and extending life); 1/4″ male flare and 3/8″ ACME inlet fittings; 3/8″ female flare x 1/2″ ACME adapter; easy to read sight glass; easy access oil fill port; oil drain valve positioned at the bottom of the oil reservoir and angled for faster, more complete draining; and non-skid feet. Oil included. Robinair, a Bosch Automotive Service Solutions brand, is a global leader in service tools and equipment based in Owatonna, Minnesota. Robinair is recognized throughout the world as the quality and performance leader in AC/R evacuation tools and this position has led to its success with the full range of products that serve the heating/ventilating/air conditioning/refrigeration (HVAC-R) and mobile markets, which includes the automotive aftermarket along with other industries such as agriculture and construction.

The Robinair 15434 CoolTech vacuum pump features power and capacity for a wide range of service applications, a high CFM rating for fast, thorough evacuation and a two-stage rotary design. Features: Iso-Valve – Isolates the pump from the system with just a quarter-turn; Gas Ballast – Moisture laden air passing through the pump mixes with relatively dry air to such a degree that compression does not cause condensation; Two-stage Design – Cleans the system more thoroughly than a single-stage pump, the second stage starts pumping at a lower pressure so you can pull a deeper, ultimate vacuum; Oil Drain Valve – Positioned at the bottom of the oil reservoir and angled for faster, more complete draining; Oil Fill Port – Makes adding oil simple since the port is accessible from the front or either side. The sight glass on the front of the pump shows you when enough oil has been added; Heavy-Duty Motor – High torque design for easy startup and efficient operation; Offset Rotary Vanes – Our proven design builds a powerful compression within the pumping chamber to reduce system pressure and vaporize moisture so it can be exhausted along with air; Molded Base – Durable polycarbonate base improves pump balance and minimizes vibration during operation; and Die-Cast Aluminum Housing – Cast aluminum housings make the pumps lightweight but durable.

Robinair’s No. 15115 VacuMaster Single Stage Vacuum Pump is a high performance single stage rotary vane design vacuum pump designed for air conditioning and refrigeration service. 1.5 CFM free air displacement, factory rating to 115 microns, and 10 ounce oil reservoir provide the capability you need to get the job done. This durable unit features a 1/5 HP, 110V, 60 Hz thermally protected motor; an inlet fitting engineered for maximum airflow while preventing oil backflow; finned aluminum surfaces that dissipate heat faster (keeping pump cooler and extending life); 1/4 inch flare and 1/2 inch ACME inlet fittings; easy to read sight glass; easy access oil fill port; oil drain valve positioned at the bottom of the oil reservoir and angled for faster, more complete draining; and non-skid feet. Oil included. Robinair, a Bosch Automotive Service Solutions brand, is a global leader in service tools and equipment based in Owatonna, Minnesota. Robinair is recognized throughout the world as the quality and performance leader in AC/R evacuation tools and this position has led to its success with the full range of products that serve the heating/ventilating/air conditioning/refrigeration (HVAC-R) and mobile markets, which includes the automotive aftermarket along with other industries such as agriculture and construction.

Vacuum Gauge, 0-30 In with 1. 5 Inch Diameter Face and 1/8 Inch NPT Threads. Possible Tell-Tale

Description
This mini pressure gauge is designed for fuel in automative replacement industry, which is used for measuring the fuel pressure.

Dial size : 1-1/2″
Process connection : 1/8″NPT male center back
Case : 304 stainless steel case and crimped ring
Window : Polycarbonate
Dial plate : aluminum, black, with pointer stop
Pointer : Aluminum, red, DIN style
Boudon tube : Copper alloy
Movement : Brass
Connection : Brass,two pieces design
Oil cap : rubber, black color
Filling : Glycerin filled, dampens the effect of vibration and pulsation; lubricates the movement and extends the life of gauge.
IP class : IP67
Accuracy : +/-3-2-3%
Pressure range : 0-100psi single scale
Working temperature : -4 to 140 deg F/-20 to 60 deg C
Ambient temperature : 140 deg F/60 deg C maximum

Meaureman has 20 years rich experience in the measuring of pressure, temperature, flow, level industries, The “Measureman” branded products are the combination of continuous good quality and affordable price. “Measureman” products are selected and designed by professional engineers.